2 bar ECM again/still (HELP)

[TK]

Programmer? I shutter to think..............

----- Original Message -----
From: Shannen Durphey <shannen at grolen.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, March 29, 2001 8:12 PM
Subject: Re: 2 bar ECM again/still (HELP)


> You're looking at Promgrammer, yes?  The hex display second line, 0x0010,
begins
> with the 17th byte and not the 9th. : )
>
>
> 0x0000  0D 53 0D 2A 05 8C D1 EE 58 80 0A 97 15 F1 00 E8
>                                    ^^
> 0x0010  5F D0 3A F8 A0 02 00 0D 00 FF 00 EB 00 10 00 AB
> Shannen
>
>
>
>
>
> ECMnut at aol.com wrote:
> >
> > The GM docs state that the cylinder byte value is:
> >   4cyl = hex 80  (turbo sunbird)
> >   6cyl = hex C0 (turbo syclone/typhoon)
> >   8cyl = Hex 00
> >
> > I looked at the ACTUAL turbo Sunbird & Syclone chips and found:
> >    4 cyl = E8
> >    6 cyl = C8
> > Hmmm..
> > Why the differences from the docs to "real world"?
> > Does this mean the 8cyl value will differ from the docs?
> > tia
> > mike v
> >
> > > No there weren't any oem 2 bar 749 apllications, thou the hac show the
> > >  select to 8 cyl..
> > >  Bruce
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org