2 bar ECM again/still (HELP)

[Bruce Plecan]

Here I thought it was a nervous tic.
<g>
Bruce

From: "TK" <terryk at foothill.net>
> Programmer? I shutter to think..............

> From: Shannen Durphey shannen at grolen.com
> > You're looking at Promgrammer, yes?  The hex display second line,
0x0010,
> begins  with the 17th byte and not the 9th. : )

> > 0x0000  0D 53 0D 2A 05 8C D1 EE 58 80 0A 97 15 F1 00 E8
> >                                    ^^
> > 0x0010  5F D0 3A F8 A0 02 00 0D 00 FF 00 EB 00 10 00 AB
> > Shannen
> > ECMnut at aol.com wrote:
> > > The GM docs state that the cylinder byte value is:
> > >   4cyl = hex 80  (turbo sunbird)
> > >   6cyl = hex C0 (turbo syclone/typhoon)
> > >   8cyl = Hex 00
> > >
> > > I looked at the ACTUAL turbo Sunbird & Syclone chips and found:
> > >    4 cyl = E8
> > >    6 cyl = C8
> > > Hmmm..
> > > Why the differences from the docs to "real world"?
> > > Does this mean the 8cyl value will differ from the docs?
> > > tia
> > > mike v
> > >
> > > > No there weren't any oem 2 bar 749 apllications, thou the hac show
the
> > > >  select to 8 cyl..
> > > >  Bruce

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org