ECM Rev Limiters

[Daniel Collins]

Try dropping the threshold to 2-3000 rpm for testing and set the high/low
points to 15 rpm you will find it holds better

Daniel
.

>Hi All,
>
>Well I hit the Rev Limiter in my car the otherday (for the first time),
>which to my surprise is quite different to what I expected.
>I thought it would be like a Champ car's 'dt.dt.dt.dt.dt' type thing coming
>down pit lane (know what I mean?) , but the engine basically died for a
good
>1/2 second then refired.
>I've looked at the cals and the RPM cut High/Low limits are only 100RPM
>apart (factory spec).
>What has everybody's experiences been here, what would be the result if I
>reduced this to say a 50 or 25 RPM difference to reduce the 'embarrassing
>way it works now.
>
>Thanks,
>Ross Myers
>
>---------------------------------------------------------------------------
-
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org