info req on 7748 computers

[Programmer]

How close is it to the '170 for the Fiero ?

Lyndon.

----- Original Message -----
From: pat ford <pford at sofcom.com>
To: <gmecm at diy-efi.org>
Sent: Monday, May 14, 2001 12:19 PM
Subject: Re: Re: info req on 7748 computers


hmm could have been a j6000, they all look the same to a foreign car
mechanic 8*) it was an LE model. As soon as I down load the code I'll posted
it. Is there any ecu files or hacked bins for it?

Thanks


---- Begin Original Message ----
 From: Shannen Durphey <shannen at grolen.com>
Sent: Mon, 14 May 2001 12:26:50 -0400
To: gmecm at diy-efi.org
Subject: Re: info req on 7748 computers

Minor point, but you got that ecm from a 6000, not a J 2000. The J cars were
never
equipped w/ 2.5.

Isn't this the same ecm as used in Fieros? Might want to poke around Ludis'
site.
The calibrations I find for that engine (LR8) and 5 speed trans stop in 1988
with
the Fiero. There are calibrations for another 2.5(L68) w/ 5 speed and 7748
in
1990, including ASLD2107, and ASLF2112. Neither of these are for the 6000.

There are also many other years which list calibrations for this
engine/trans/ecm.
It looks promising for your swap.

Mind sending the .bin this way?
Shannen

pat ford wrote:
>
> Hi All;
> yesterday I got a 7748 ( with another number 16145991) and everything
thing else from a 1990 Pontiac J2000. I snarfed the whole engine harness all
the sensors, and all the connectors, even the DIS system.
>
> My questions are:
> 1)how close is this to either the 730 or 747 computers ( how much info is
out there?)
>
> 2) the bcc from the eprom is ATRB 6062 this is a 2.5L 4cyl auto(fwd) DIS
system, is there a 5 speed cal for it? what other bins will work??
>
> 3) is ths a good system to put into a car or is it good for play only?
>
> ps anyone want a copy of the bin when I pull it??
> thanks
>
> Pat Ford
> 12 Strathcona St
> Smith Falls,On
> 613-283-4703
> __________________________________________
> Sent by Sofcom Mail - The world's coolest and safest FREE email service.
> http://www.sofcom.com.au
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org


---- End Original Message ----



Pat Ford
12 Strathcona St
Smith Falls,On
613-283-4703
__________________________________________
Sent by Sofcom Mail - The world's coolest and safest FREE email service.
http://www.sofcom.com.au
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org