info req on 7748 computers

[Programmer]

Oh yeah--that was the V6 comp, right ? What about the older one for the
4 cyl ?

----- Original Message -----
From: terryk <terryk at foothill.net>
To: <gmecm at diy-efi.org>
Sent: Monday, May 14, 2001 5:40 PM
Subject: Re: Re: info req on 7748 computers


> Very different.
>
> ----- Original Message -----
> From: "Programmer" <nwester at eidnet.org>
> To: <gmecm at diy-efi.org>
> Sent: Monday, May 14, 2001 4:18 PM
> Subject: Re: Re: info req on 7748 computers
>
>
> > How close is it to the '170 for the Fiero ?
> >
> > Lyndon.
> >
> > ----- Original Message -----
> > From: pat ford <pford at sofcom.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Monday, May 14, 2001 12:19 PM
> > Subject: Re: Re: info req on 7748 computers
> >
> >
> > hmm could have been a j6000, they all look the same to a foreign car
> > mechanic 8*) it was an LE model. As soon as I down load the code I'll
> posted
> > it. Is there any ecu files or hacked bins for it?
> >
> > Thanks
> >
> >
> > ---- Begin Original Message ----
> >  From: Shannen Durphey <shannen at grolen.com>
> > Sent: Mon, 14 May 2001 12:26:50 -0400
> > To: gmecm at diy-efi.org
> > Subject: Re: info req on 7748 computers
> >
> > Minor point, but you got that ecm from a 6000, not a J 2000. The J cars
> were
> > never
> > equipped w/ 2.5.
> >
> > Isn't this the same ecm as used in Fieros? Might want to poke around
> Ludis'
> > site.
> > The calibrations I find for that engine (LR8) and 5 speed trans stop in
> 1988
> > with
> > the Fiero. There are calibrations for another 2.5(L68) w/ 5 speed and
7748
> > in
> > 1990, including ASLD2107, and ASLF2112. Neither of these are for the
6000.
> >
> > There are also many other years which list calibrations for this
> > engine/trans/ecm.
> > It looks promising for your swap.
> >
> > Mind sending the .bin this way?
> > Shannen
> >
> > pat ford wrote:
> > >
> > > Hi All;
> > > yesterday I got a 7748 ( with another number 16145991) and everything
> > thing else from a 1990 Pontiac J2000. I snarfed the whole engine harness
> all
> > the sensors, and all the connectors, even the DIS system.
> > >
> > > My questions are:
> > > 1)how close is this to either the 730 or 747 computers ( how much info
> is
> > out there?)
> > >
> > > 2) the bcc from the eprom is ATRB 6062 this is a 2.5L 4cyl auto(fwd)
DIS
> > system, is there a 5 speed cal for it? what other bins will work??
> > >
> > > 3) is ths a good system to put into a car or is it good for play only?
> > >
> > > ps anyone want a copy of the bin when I pull it??
> > > thanks
> > >
> > > Pat Ford
> > > 12 Strathcona St
> > > Smith Falls,On
> > > 613-283-4703
> > > __________________________________________
> > > Sent by Sofcom Mail - The world's coolest and safest FREE email
service.
> > > http://www.sofcom.com.au
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
> > ---- End Original Message ----
> >
> >
> >
> > Pat Ford
> > 12 Strathcona St
> > Smith Falls,On
> > 613-283-4703
> > __________________________________________
> > Sent by Sofcom Mail - The world's coolest and safest FREE email service.
> > http://www.sofcom.com.au
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org