info req on 7748 computers

[miked-ele]

are there any ecu files for the 7170 floating out there??  I found an '7170
S19 file in the world of Ludis.  Any help would be appreciated.

Mike D
-----Original Message-----
From: terryk <terryk at foothill.net>
To: gmecm at diy-efi.org <gmecm at diy-efi.org>
Date: Monday, May 14, 2001 7:56 PM
Subject: Re: Re: info req on 7748 computers


>For the Fiero,
>
>84-86 4 Cyl was the 6156 C3
>87-88 4 Cyl was the 7748 P4
>
>85 6 Cyl was the 6869 C3 (used only in the Fiero)
>86-88 6 Cyl was the 7170 C3 (used only in the Fiero)
>
>According to the Effervescent Ludis Langens, the 6869, 6870 and 7170 are
the
>same ECM with some slight part loading differences and different in
>processor code.
>
>
>
>----- Original Message -----
>From: "Programmer" <nwester at eidnet.org>
>To: <gmecm at diy-efi.org>
>Sent: Monday, May 14, 2001 5:07 PM
>Subject: Re: Re: info req on 7748 computers
>
>
>> Oh yeah--that was the V6 comp, right ? What about the older one for the
>> 4 cyl ?
>>
>> ----- Original Message -----
>> From: terryk <terryk at foothill.net>
>> To: <gmecm at diy-efi.org>
>> Sent: Monday, May 14, 2001 5:40 PM
>> Subject: Re: Re: info req on 7748 computers
>>
>>
>> > Very different.
>> >
>> > ----- Original Message -----
>> > From: "Programmer" <nwester at eidnet.org>
>> > To: <gmecm at diy-efi.org>
>> > Sent: Monday, May 14, 2001 4:18 PM
>> > Subject: Re: Re: info req on 7748 computers
>> >
>> >
>> > > How close is it to the '170 for the Fiero ?
>> > >
>> > > Lyndon.
>> > >
>> > > ----- Original Message -----
>> > > From: pat ford <pford at sofcom.com>
>> > > To: <gmecm at diy-efi.org>
>> > > Sent: Monday, May 14, 2001 12:19 PM
>> > > Subject: Re: Re: info req on 7748 computers
>> > >
>> > >
>> > > hmm could have been a j6000, they all look the same to a foreign car
>> > > mechanic 8*) it was an LE model. As soon as I down load the code I'll
>> > posted
>> > > it. Is there any ecu files or hacked bins for it?
>> > >
>> > > Thanks
>> > >
>> > >
>> > > ---- Begin Original Message ----
>> > >  From: Shannen Durphey <shannen at grolen.com>
>> > > Sent: Mon, 14 May 2001 12:26:50 -0400
>> > > To: gmecm at diy-efi.org
>> > > Subject: Re: info req on 7748 computers
>> > >
>> > > Minor point, but you got that ecm from a 6000, not a J 2000. The J
>cars
>> > were
>> > > never
>> > > equipped w/ 2.5.
>> > >
>> > > Isn't this the same ecm as used in Fieros? Might want to poke around
>> > Ludis'
>> > > site.
>> > > The calibrations I find for that engine (LR8) and 5 speed trans stop
>in
>> > 1988
>> > > with
>> > > the Fiero. There are calibrations for another 2.5(L68) w/ 5 speed and
>> 7748
>> > > in
>> > > 1990, including ASLD2107, and ASLF2112. Neither of these are for the
>> 6000.
>> > >
>> > > There are also many other years which list calibrations for this
>> > > engine/trans/ecm.
>> > > It looks promising for your swap.
>> > >
>> > > Mind sending the .bin this way?
>> > > Shannen
>> > >
>> > > pat ford wrote:
>> > > >
>> > > > Hi All;
>> > > > yesterday I got a 7748 ( with another number 16145991) and
>everything
>> > > thing else from a 1990 Pontiac J2000. I snarfed the whole engine
>harness
>> > all
>> > > the sensors, and all the connectors, even the DIS system.
>> > > >
>> > > > My questions are:
>> > > > 1)how close is this to either the 730 or 747 computers ( how much
>info
>> > is
>> > > out there?)
>> > > >
>> > > > 2) the bcc from the eprom is ATRB 6062 this is a 2.5L 4cyl
auto(fwd)
>> DIS
>> > > system, is there a 5 speed cal for it? what other bins will work??
>> > > >
>> > > > 3) is ths a good system to put into a car or is it good for play
>only?
>> > > >
>> > > > ps anyone want a copy of the bin when I pull it??
>> > > > thanks
>> > > >
>> > > > Pat Ford
>> > > > 12 Strathcona St
>> > > > Smith Falls,On
>> > > > 613-283-4703
>> > > > __________________________________________
>> > > > Sent by Sofcom Mail - The world's coolest and safest FREE email
>> service.
>> > > > http://www.sofcom.com.au
>> > >
>> >
>>
>> -------------------------------------------------------------------------
-
>> > > --
>> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
>> quotes)
>> > > > in the body of a message (not the subject) to
>> > majordomo at lists.diy-efi.org
>> >
>>
>> -------------------------------------------------------------------------
-
>> > --
>> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
>quotes)
>> > > in the body of a message (not the subject) to
>> majordomo at lists.diy-efi.org
>> > >
>> > >
>> > > ---- End Original Message ----
>> > >
>> > >
>> > >
>> > > Pat Ford
>> > > 12 Strathcona St
>> > > Smith Falls,On
>> > > 613-283-4703
>> > > __________________________________________
>> > > Sent by Sofcom Mail - The world's coolest and safest FREE email
>service.
>> > > http://www.sofcom.com.au
>> >
>>
>> -------------------------------------------------------------------------
-
>> > --
>> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
>quotes)
>> > > in the body of a message (not the subject) to
>> majordomo at lists.diy-efi.org
>> > >
>> > >
>> >
>>
>> -------------------------------------------------------------------------
-
>> > --
>> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
>quotes)
>> > > in the body of a message (not the subject) to
>> majordomo at lists.diy-efi.org
>> > >
>> > >
>> >
>>
>> -------------------------------------------------------------------------
-
>> --
>> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
>> > in the body of a message (not the subject) to
>majordomo at lists.diy-efi.org
>> >
>> >
>>
>> -------------------------------------------------------------------------
-
>--
>> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>>
>>
>
>---------------------------------------------------------------------------
-
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org