DIY-WB... It's alive...

[Scott Pearson]

Is there any word on the idea of parts kits?

Scott

----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <gmecm at diy-efi.org>; <diy_efi at diy-efi.org>
Sent: Saturday, September 02, 2000 3:17 PM
Subject: Re: DIY-WB... It's alive...


>
> I'm probably as excited as you, to hear it's working...
> POWWOW should be even more fun with some WBs here.
> Bruce
>
>
>
>
> From: "Mark S. Riley" <turbotuneusltd at triad.rr.com>
> Subject: DIY-WB... It's alive...
>
>
> > Got the board finished and mounted in the box to the lid like Bob R did.
> Put
> > the terminal strip on the top side of the lid. Got everything hooked up
> and
> > it heated but voltage stayed at 2.48 volt. Took it back apart and I put
> the
> > led in backwards and had one of the leads on capacitor C7 touching the
> trace
> > crossing under it. Not quite the way it's supposed to be. Repaired those
> > goofs and it works!! Clean air voltage is 3.98 and sticking it in the
end
> of
> > the tail pipe on my Escort shows voltages down to 2.2 volt just patting
> the
> > gas pedal. Now have to put a bung in front of the cat to get more
accurate
> > part throttle readings. Am going to make a two bung pipe kinda like
> Bruce's
> > so I can check it against Horiba driving around. Later, Mark
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org