ECMs & Kernals

[Malcolm Robb, LC 0112G]

This is almost exactly how my P4 works. The only notable difference appears 
to be the ALDL 'one shot' stuff. If I understand right, the C3's have a 160 
baud ALDL protocol, and so the CPU 'manually' transmits one bit per kernel 
loop. The P4 has a 'real' hardware UART which transmits at 8192 baud, and 
most of the processing for this is handled in a separate interrupt 'thread' 
as I explained yesterday.

All the rest of bobs 'Kernel 101' looks spot on to me.

Cheers,
Malcolm Robb, LC 0112G

-----Original Message-----
From:	Pat Ford [SMTP:pat at istop.com]
Sent:	Wednesday, September 05, 2001 1:03 AM
To:	gmecm at diy-efi.org
Subject:	Re: ECMs & Kernals

 Most excellent information, does anyone have similar info on the P4
ecms?
rr wrote:
>
> Several folks inquired about the internal works of the kernal. I've
> also changed the subject line.
>
> BobR.
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org