[Gmecm] Re: Datalogging '94-'95 LT1 computer

[M. Mansur]

For the same reasons, no, TunerPro does not do well with these. After the 
re-write, yes, it will work just fine. The problem here is that the ECM is 
sending information via the scheduler to the digital dash. The scanner 
(TunerPro in this case) must listen for the chatter and send the silence 
command first before requesting the mode 1 message X data.

The current build of TunerPro will have trouble with any "chatty" Mask/BCC. 
That is soon to change. I've got a few local SyTy guys knocking on my door 
often to ask me to get these changes in as well, so the changes are 
imminent.

M

----- Original Message ----- 
From: "Sj?din Robert" <robert.sjodin at scania.com>
To: <gmecm at diy-efi.org>
Sent: Friday, August 19, 2005 1:03 AM
Subject: RE: [Gmecm] Re: Datalogging '94-'95 LT1 computer


Will Tuner Pro RT work on Corvettes which have a CCM (90-96?)? As far as I 
can tell the CCM sends a $F0 poll that the ECM will respond to but when the 
CCM sends its poll it (I think) does not wait for an idle line.

I've had some problem when trying to run some F-body programs on my 91 
Vette, I thought one should set the CCM in mode 8 to get it to work? Sorry 
if this question is little off topic.

Rob


-----Original Message-----
From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf 
Of Mark Mansur
Sent: den 18 augusti 2005 22:37
To: gmecm at diy-efi.org
Subject: Re: [Gmecm] Re: Datalogging '94-'95 LT1 computer


Since Dave was kind enough to bring it up, I should mention for completeness
that TunerPro RT will work fine for ALDL monitoring/logging the 92/93 LT1s
(DAx), but you may run into trouble with 94/95. This is because of the
EE/EEB masks' message schedules spewing out unsolicited data (similar to
$58). You must first send out the mode 8 silence command at the proper time
to get the ECM to shut up before the software can connect.

I will be re-writing the ALDL engine within TunerPro over the next 2 or 3
months to solve this and a few other issues, as well as add a bunch of other
features (histograms, new logging functionality, etc).

Also, TunerPro RT is also free and registration is 100% optional. If you
like it but feel you'd rather not spend the $30, then don't. Contrary to
popular belief (or, to quote one at least), you don't always have to pay if
you want to play! ;-)

While I have your ear (er, eyes), the next version of TunerPro will feature
ALDL data tracing such that you can monitor where in a table (spark, fuel,
etc) the car is actively running. The cells in the spark table, for
instance, will be highlighted based off of the RPM and Load information
being gathered via the ALDL. Look for that release in another couple of
weeks (it currently works quite nicely with my $6E '165).

Let me know if (any of) you have anything else you'd like to see TunerPro
do.

Mark
http://tunerpro.markmansur.com/

----- Original Message ----- 
From: "Dave Jones" <hotrodder at mindspring.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 18, 2005 1:19 PM
Subject: Re: [Gmecm] Re: Datalogging '94-'95 LT1 computer


> How about Freescan?   It might not be the best, but it's enough to get you
> started, and the price is right.
> http://www.andywhittaker.com/ecu/ecu_software.htm
>
> If you decide to go with Datamaster, Andrew Mattei sells the license
> for
> $95, which is below TTS's list price.
> http://www.akmcables.com/
>
> I haven't yet gotten around to trying the datalogging function of
> TunerPro
> RT with the LT1, but it seems like it should work.  If you want to give
> that a shot, you could try it for free.  If it works for you, RT is only
> $30 to register.
> http://www.supportfitness.com/mark/tunerpro/
>
> HTH,
> Dave
>
>
>
>>> What's the best product for datalogging a '94-'95 LT1 computer? I've
>>> had TTS Datamaster recommended to me but it seems a bit expensive to
>>> someone coming
>>> from the realm of WinALDL and basically free/$30 software downloads for
>>> older PCM's. Is anything else out there very good? What else is out
>>> there?
>>>
>>>
>>> Will
>
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org http://lists.diy-efi.org/mailman/listinfo/gmecm
>
_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org http://lists.diy-efi.org/mailman/listinfo/gmecm
_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm