[Gmecm] Can't keep car in closed loop...

D.Pray dpray
Sat Mar 19 17:29:17 UTC 2005


No, that's normal. It's called hysterisis. You don't want it going back and from from OL to CL as the temperature traverses 176 degrees. There are tolerances in every component and if you allow for a 10% error in the temperature sender, you will find your problem. The first thing that you should do is install a 195 thermostat and see if the problem persists. If it does, then you can rule that out.

  ----- Original Message ----- 
  From: Aaron Russell 
  To: gmecm at diy-efi.org 
  Sent: Saturday, March 19, 2005 8:02 AM
  Subject: Re: [Gmecm] Can't keep car in closed loop...


  176 is gm's standard closed loop "entrance" temperature, but the temp has to drop down to well below that for it to drop out of closed loop.. thats wierd. 


    ----- Original Message ----- 
    From: David Cooley 
    To: gmecm at diy-efi.org 
    Sent: Friday, March 18, 2005 11:02 PM
    Subject: RE: [Gmecm] Can't keep car in closed loop...


    180 may be marginal.
    195-210 is normal operating temp and depending on the cal, 180 may be why it's dropping out of closed loop.  possibly cooling down too much when the stat opens and dropping below 180.




--------------------------------------------------------------------------
      From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf Of Sixpakmak15 at aol.com
      Sent: Friday, March 18, 2005 10:17 PM
      To: gmecm at diy-efi.org
      Subject: Re: [Gmecm] Can't keep car in closed loop...


      coolants normal... about 180... but I'll check the ground... thanks 
      


----------------------------------------------------------------------------


    _______________________________________________
    Gmecm mailing list
    Gmecm at diy-efi.org
    http://lists.diy-efi.org/mailman/listinfo/gmecm



------------------------------------------------------------------------------


  _______________________________________________
  Gmecm mailing list
  Gmecm at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/gmecm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20050319/8ed2cdc2/attachment.html 



More information about the Gmecm mailing list