[Gmecm] High CR TBI

[Programmer]

Camshaft was quite mild...12-408-8 Comp roller.

The common mistake is crazy camshafts with low compression. I don't know why 
the magazines push those combinations--they never work...especially not in a 
heavy vehicle. There aren't many trucks that scream 5-6K RPM all day long as 
a daily driver...LOL, so those combinations never work well.

Lyndon

----- Original Message ----- 
From: "Mike V" <efi at dyakron.com>
To: <gmecm at diy-efi.org>
Sent: Friday, August 04, 2006 10:40 AM
Subject: Re: [Gmecm] High CR TBI


> Hi Lyndon,
> by 'mistake' you're referring to people going too wild on the overlap
> with a MAP system??
> Do you have the specs handy on his cam?
> Cheers,
> MV
>
> At 09:10 AM 8/4/2006 -0600, you wrote:
>
>>We used the edelbrock conv 8 injectors...Holley TBI, and machined  the 
>>manifold ports to match. Picked a very mild camshaft--often this is the 
>>first mistake most people make...
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm