[Gmecm] Re: MSD or Delco DIS

[David Allen]

  It's an ironhead MPFI 2.8, with a distributor. Turbo intercooled.  I would 
be just as happy with a standard Delco DIS setup if it will ignite my 
turbocharged engine.
  See http://home.hiwaay.net/~davida1/turbo2.htm for the engine information. 
or http://home.hiwaay.net/~davida1/superc.htm.
Thanks!
David


----- Original Message ----- 
From: "William Lucke" <william.lucke at highspeedlink.net>
To: <gmecm at diy-efi.org>
Sent: Thursday, December 28, 2006 2:34 PM
Subject: [Gmecm] Re: MSD or Delco DIS


> What kind of engine? There are MSD amplifiers compatible with DIS as well.
>
>
> Will
>
>
>> From: "David Allen" <davida1 at hiwaay.net>
>> Subject: [Gmecm] MSD or Delco DIS
>>
>>   Hey I have been wondering... My car does not have the proper mounting 
>> points for a crank trigger for use with factory DIS ignition.  I know it 
>> could be fabricated or adapted with medium difficulty.  I have instead 
>> gone with a MSD-6A ignition amplifier controlled by my ECM.
>>   Is this setup as strong as a Delco DIS setup?  It made a world of 
>> difference in high RPM power, versus a plain 1-coil HEI distributor.
>>   In the future I plan to build up a newer turbo motor and will probably 
>> go DIS at that time.
>>   Just curious what everyone's thoughts are on this.
>> Thanks,
>> David
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm
>