[Gmecm] C3 ECM questions

[David Allen]

Hey, thanks! I forgot about that.  Someone needs to write AutoZone a
thank-you letter for this service.
David

----- Original Message ----- 
From: "Steve Ravet" <Steve.Ravet at arm.com>
To: <gmecm at diy-efi.org>
Sent: Saturday, February 25, 2006 4:08 PM
Subject: RE: [Gmecm] C3 ECM questions


> Here's a site everyone should bookmark:
>
> http://www.autozone.com/servlet/UiBroker?UseCase=RG001&UserAction=viewRe
> pairGuideYMMEYear
>
> select year, then make, then model, then "chassis electrical", then
> "wiring diagrams" near the bottom of the box on the right, then scroll
> to figure 23, engine wiring turbo v6.
>
> --steve
>
> > -----Original Message-----
> > From: gmecm-bounces at diy-efi.org
> > [mailto:gmecm-bounces at diy-efi.org] On Behalf Of David Allen
> > Sent: Saturday, February 25, 2006 7:38 PM
> > To: gmecm at diy-efi.org
> > Subject: Re: [Gmecm] C3 ECM questions
> >
> > Aha!  Anyone have a pinout for an 84 or 85 turbo Buick
> > 1226459 ECM?  I looked through the FTP fles and couldn't find
> > any schematic.
> > Thanks for the lead.
> > David
> >
> > ----- Original Message -----
> > From: "Mike V" <efi at dyakron.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Saturday, February 25, 2006 3:46 PM
> > Subject: Re: [Gmecm] C3 ECM questions
> >
> >
> > > Oops, hat''s right.
> > > David's ECM is more likely to be simlar to the
> > > 86-87 turbo Buick ECM.
> > > MV
> > >
> > > At 12:54 PM 2/25/2006 -0500, you wrote:
> > > >Ummm,  sorry,  the 749 has 3 connectors.
> > > >
> > > >Bill
> > > >'84 928s 5 sp. Vortech/749
> > > >
> > > >
> > > > > From: Mike V <efi at dyakron.com>
> > > > >
> > > > > At 07:19 AM 2/25/2006 -0800, you wrote:
> > > > >> Mike, my ECM is mounted in the car.  It has 2
> > connectors as opposed
> > to
> > > > the 3
> > > > >> connectors of the more modern ones.  I don't know of
> > what 2-connector
> > ECM
> > > > >> would have gone with a turbo engine. That's a good
> > idea and i will
> > > > look into
> > > > >> it, though!
> > > > >> Thanks,
> > > > >> David
> > > > > Try looking for the 7749 turbo ECM pin-outs.
> > > > > it was an interior mounted ECM.  (two plugs).
> > > > > I don't have Ludis' URL handy but if you can't find
> > > > > apin-out let me know.
> > > > > Mike V
> > > > >
> > > >
> > > >_______________________________________________
> > > >Gmecm mailing list
> > > >Gmecm at diy-efi.org
> > > >http://lists.diy-efi.org/mailman/listinfo/gmecm
> > >
> > > _______________________________________________
> > > Gmecm mailing list
> > > Gmecm at diy-efi.org
> > > http://lists.diy-efi.org/mailman/listinfo/gmecm
> > >
> >
> > _______________________________________________
> > Gmecm mailing list
> > Gmecm at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/gmecm
> >
>
> -- IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended
recipient, please notify the sender immediately and do not disclose the
contents to any other person, use it for any purpose, or store or copy the
information in any medium.  Thank you.
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
>
>