[Gmecm] $A1 disassembly

[Steve Ravet]

I'm not sure.  There are some disassemblies on the gmecm page (click
papers) but not $A1.  Check over at thirdgen.org which is where RBob
hangs out.

--steve 

> -----Original Message-----
> From: gmecm-bounces at diy-efi.org 
> [mailto:gmecm-bounces at diy-efi.org] On Behalf Of William Lucke
> Sent: Thursday, March 02, 2006 10:02 AM
> To: gmecm at diy-efi.org
> Subject: [Gmecm] $A1 disassembly
> 
> Where do I get said disassembly to have a look? FTP Site?
> 
> 
> Will
> 
> 
> > Steve Ravet <Steve.Ravet at arm.com> wrote:  Obviously we need to use 
> > some limits more appropriate to the DIS ignition system.  A simple 
> > check of Rob Rauscher's extremely helpful $A1 disassembly shows a 
> > maximum value of -9.9 deg and a minimum value of -70 deg.  Be
> > warned:    These are 16 bit 2's complement numbers.  They 
> appear in a 
> > binary as $FFE4 and $FF39, respectively.
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
> 

-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.