[Gmecm] $A1 disassembly

[Darren Freed]

Sorry, that's just the commented cal data.  I combined that with a 
disassembly of the code and put it on my website:

http://home.cc.umanitoba.ca/~umfreedd/index_files2/ARUR.txt

HTH

darren



Darren Freed wrote:
> its on the ftp site, in incoming.  look for 727_730_A1.doc
> 
> darren
> 
> 
> 
> Steve Ravet wrote:
> 
>> I'm not sure.  There are some disassemblies on the gmecm page (click
>> papers) but not $A1.  Check over at thirdgen.org which is where RBob
>> hangs out.
>>
>> --steve
>>
>>> -----Original Message-----
>>> From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On 
>>> Behalf Of William Lucke
>>> Sent: Thursday, March 02, 2006 10:02 AM
>>> To: gmecm at diy-efi.org
>>> Subject: [Gmecm] $A1 disassembly
>>>
>>> Where do I get said disassembly to have a look? FTP Site?
>>>
>>>
>>> Will
>>>
>>>
>>>
>>>> Steve Ravet <Steve.Ravet at arm.com> wrote:  Obviously we need to use 
>>>> some limits more appropriate to the DIS ignition system.  A simple 
>>>> check of Rob Rauscher's extremely helpful $A1 disassembly shows a 
>>>> maximum value of -9.9 deg and a minimum value of -70 deg.  Be
>>>> warned:    These are 16 bit 2's complement numbers.  They 
>>>
>>>
>>> appear in a
>>>
>>>> binary as $FFE4 and $FF39, respectively.
>>>
>>>
>>> _______________________________________________
>>> Gmecm mailing list
>>> Gmecm at diy-efi.org
>>> http://lists.diy-efi.org/mailman/listinfo/gmecm
>>>
>>
>>
>> -- IMPORTANT NOTICE: The contents of this email and any attachments 
>> are confidential and may also be privileged. If you are not the 
>> intended recipient, please notify the sender immediately and do not 
>> disclose the contents to any other person, use it for any purpose, or 
>> store or copy the information in any medium.  Thank you.
>>
>> _______________________________________________
>> Gmecm mailing list
>> Gmecm at diy-efi.org
>> http://lists.diy-efi.org/mailman/listinfo/gmecm
>>
>>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
> 
>