[Gmecm] 7747 real-time tuning

[Charles McDowell]

I'll give this a shot and see what happens.  If it works, I'm confused about
how it ever worked with the emulator, since I've never had the checksum
disabled, and I was tuning in real time (and seeing BLM's) for a while.

Thanks. 

-----Original Message-----
From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf
Of Programmer
Sent: Monday, March 20, 2006 12:21 PM
To: gmecm at diy-efi.org
Subject: Re: [Gmecm] 7747 real-time tuning

To start, set byte $04 to "AA" instead of "42".  This will set a 'checksum
ignore result'.

I'd think code 51 and no BLM updates would be hand in hand...pretty much
anything in the code would be ignored with code
51 set.

Lyndon.

----- Original Message -----
From: "Charles McDowell" <charles at taildragger.info>
To: <gmecm at diy-efi.org>
Sent: Sunday, March 19, 2006 7:22 PM
Subject: [Gmecm] 7747 real-time tuning


> I'm working on tuning my Blazer with transplanted 7747.  I got an 
> "Ostrich"
> from Moates.net and I'm using Tunerpro RT to do adjustments with the 
> engine
> running.  I'm monitoring things with WinALDL since I'm used to that.
>
> One thing that's happening is that I'm getting a code 51, "PROM error".
> What does this mean?  At first I thought bad checksum, but I don't think
> that's it, because I've had bad checksum before, and it results in a rapid
> flash on powerup and SES light, neither of which I get in this case.  The
> engine starts right up with no SES light or anything, I just see the code 
> 51
> in the ALDL data.  What else could it be?
>
> Another question I have is why I don't always get BLM value updates.  For
> example, I was tuning in my 800/40 VE cell and I upped the idle to 1200 
> RPM
> to try and see what was happening in that cell.  Once I got to 1200 RPM,
> WinALDL showed no BLM or INT data.  The system was still closed loop at 
> the
> time.  What decides whether BLM values come out or not?
>
> Thanks for any help.
>
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm 

_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm