[Gmecm] Interfacing HEI module to Pertronix pickup assembly

[bcroe at juno.com]

My first electronic ignition (1965) reused the original 
points. There was just a small points current through 
a resistor.  It worked fine, and the points seemed 
to last forever without that heavy ign coil load.  

Bruce Roe

18 Aug 07 "David Allen" <davida1 at hiwaay.net> writes:
>   Hey all.  I have to convert a distributor from points to 
> ECM-controlled HEI ignition.  The distributor can not 
> be modified to use a magnetic pickup coil.