[Gmecm] Parts and info requests/TPI conversion/... was: 1227727 really the same as a 1227730

[Beau Blankenship]

Bob, you should read the mailing lists terms. I don't think this list was
intended as a classified ad. Hell, look at the subject line. Does this post
have anything to do with the '727 or '730 ECM? At the very least, start a
new thread if you feel its proper to solicit transactions here. At least
then we can delete them if we choose.

I'm not trying to be hard on you, but this keeps happening. This is a D I Y
list and there is plenty of info on the internet and in this lists archives.
This is a project for you to learn and enjoy. If you don't want to learn,
just enjoy, then find a competent shop to do the work for you and fork over
the cash. eBay is a good place for parts, as are the local salvage yards,
swap meets, car shows, etc. DIY implies that you Do It Yourself. Searching,
researching, wrench turning, knuckle busting and head scratching. Your 350
TPI project has been done so many times and is documented in so many places,
you should have no problem finding info. Google should be your best friend
through the project and even after.

In my reply to your off-list e-mail, I recommended a couple of books to
read. Get those books and gather your parts. Don't be scared. Just jump in
there and start turning wrenches. Hell, its not you daily driver, is it?
It's a project. When you run into problems that you can't resolve with the
books, archives, Google, and other resources, post a question to the list. I
say "to the list" because you will get many more answers and possible ways
to resolve your problem. Plus, each of us may not have the time to
trouble-shoot your system when you e-mail off-list. There's tons of info on
the TWiki @ http://www.diy-efi.org/twiki/bin/view.pl.

Beau

-----Original Message-----
From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf
Of BNRVL at aol.com
Sent: Thursday, August 02, 2007 9:35 AM
To: gmecm at diy-efi.org
Subject: Re: [Gmecm] Re: 1227727 really the same as a 1227730

  
Hello looking for a 1985-86  TPI lower intake manifold , can you help ? I 
just missed one on ebay . 
I have a 1969 small block 2350 ci with  the old cast iron heads .

Thanks

 Bob Norville


**************************************
 Get a sneak peek of the 
all-new AOL at http://discover.aol.com/memed/aolcom30tour
_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
Main WWW page: http://www.diy-efi.org/gmecm