[Gmecm] VSS help needed.

[Jared Ryan]

On Jun 4, 2007, at 9:08 PM, Rexdina at aol.com wrote:

> Just recently lost all my saved info. Does anyone have the part 
> numbers for
> that speedo sender that had both a cable and a magnetic output?

I've pasted it below.

> From: "Mike Wilson" <mwilson at bwarch.com>
> Date: May 30, 2007 2:35:21 PM CDT
> To: <gmecm at diy-efi.org>
> Subject: RE: [Gmecm] Re: Stumbling '7730
> Reply-To: gmecm at diy-efi.org
>
> I found a dual output VSS that came on 1993 Caprice cop cars is still
> available from several local auto parts stores. NAPA # VSS231 or CSK 
> #DR1044
> is what I used. It was around $60.
>
> It has the VSS output for the ECM and a mechanical speedometer cable 
> drive
> that was used for a mechanically driven radar gun. It worked great 
> when I
> put a 4L60 & LT1 into my 67 Chevelle with the original mechanical
> speedometer.
>
> You will just need a conversion speedometer cable made for your current
> setup if the AMC transmission connection is different and later one 
> made for
> the MG swap to use the original MG speedometer.
>
> Hope this helps,
> Mike