[Gmecm] 749 ECM

[James Panter]

Mike:   Good point you make particularly on the injectors.   I doubt whether 
the small block is a 350 or 355 would make much difference in the larger 
picture (a stroker would).  I'm using a very mild Isky cam and 45 lb 
injectors and was just really surprised at how rich the engine is intially 
after just changing the bin to reflect a V8 rather than the V6 because the 
actually cyl volume is very similar.  And, yes I have an LM1 and all the 
Moates stuff.   I was just hoping to get close on the settings  and save 
time.   The car hasn't been driven yet, just started and it's far too rich 
to drive.
I appreciate you response.
Jim
----- Original Message ----- 
From: "Mike V" <efi at dyakron.com>
To: <gmecm at diy-efi.org>
Sent: Monday, March 12, 2007 7:48 AM
Subject: Re: [Gmecm] 749 ECM


> Hi Jim,
> it's unlikely that there will be a bin that is ready made for your 
> combination of
> cam, injectors, etc.   Do you have a log file from your ALDL datastream?
> Also, what are the specifics of the engine?  There are other factors, but
> the camshaft specs and injector size are two big ones that come to mind.
> Datastream monitoring is critical for addressing this sort of thing.
> mv
>
> ----- Original Message ----- 
> From: "James Panter" <9jim30 at charter.net>
> To: <gmecm at diy-efi.org>
> Sent: Sunday, March 11, 2007 7:34 PM
> Subject: [Gmecm] 749 ECM
>
>
>> Hey Guys    Is there anyone who has done a small block Chev (twin turbos 
>> @ 8 psi boost) using the $58 program that has it tuned??  I have my 
>> project running but very rick and was hoping to find someone who could 
>> send me a corrected bin or give me line items changes they made that 
>> worked.
>> Thanks for any help---
>> Jim
>>
>> _______________________________________________
>> Gmecm mailing list
>> Gmecm at diy-efi.org
>> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
>> Main WWW page: http://www.diy-efi.org/gmecm
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm
>