<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META content="MSHTML 5.00.2314.1000" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV> </DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A href="mailto:wilcoxbl@gte.net" title=wilcoxbl@gte.net>Bruce & Lisa
Wilcox</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
href="mailto:gmecm@efi332.eng.ohio-state.edu"
title=gmecm@efi332.eng.ohio-state.edu>GMECM</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, April 08, 1999 2:41
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> 1987 5.0L TPI / T5 BIN
File</DIV>
<DIV style="FONT: 10pt arial"> </DIV>
<DIV style="FONT: 10pt arial">Just in case your not aware, if you start with
those specific bin files, then the locations that have been mentioned here
(for various tables/switches/settings), may or maynot be of any use to
you. GM uses numerous programs within a given series of bin
files. So some tables might line up, and others would be wrong.
There are several things that you can do. To utilize what has been
mentioned you can add a P/N feed wire to the ecm, and ground that, and use a
auto calibration. Or do that with the long term goal of finding the
switches settings for changing it to a manual type bin..</DIV>
<DIV><FONT size=2> So far more has been printed about the ARAP bin, for
the 165 then any other I know of</FONT></DIV>
<DIV><FONT size=2>Cheers</FONT></DIV>
<DIV><FONT size=2>Bruce</FONT></DIV>
<DIV><FONT size=2> Still
hunting for owls......<BR></DIV></FONT>
<DIV><FONT color=#000000 size=2>Does anyone have a 1987 5.0L TPI / T5 BIN
file?? The car is a 1987 IROC-Z with 16" wheels and a 3.08:1 limited slip rear
end.</FONT></DIV>
<DIV><FONT color=#000000 size=2>The ECM is a 1227165 unit and the desired
EPROM Codes (only 1 is required) are 1135ACYC (CA) or 1135ACXY
(FED).</FONT></DIV>
<DIV><FONT color=#000000 size=2>What low cost burner is recommended??? Can I
pull the EPROM out of my car, read the data into the burner, and make the BIN
file??</FONT></DIV>
<DIV><FONT color=#000000 size=2>Thanks and Best Regards,</FONT></DIV>
<DIV><FONT color=#000000 size=2>Bruce
Wilcox</FONT></DIV></BLOCKQUOTE></BODY></HTML>