<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Date: Mon, 10 May 1999 19:57:10 -0700 (PDT)
<br> From: Squash <realsquash@yahoo.com>
<br> Subject: Re: Accel AS&M S&P Follow up
<p> First, good luck finding a manifold w/o the DFI. I've
<br> tried. Second, how much is the FP ECM? How much
is
<br> the Wide-band O2 sensor? The batch fire version with
<br> the wide-band O2 is $2000 and the sequential version
<br> is $2700!
<br>That I what I have found also.
<p> Here's the part number for the Accel superram intake:
<br> N/A. That's what my accel catalog says.
<p> How much do you want to spend?
<p>DANG, not that much.($10,000) If I can get a Good Port Injection
unit for under $4000. That would be good. And Based on all these
other options everyone has mentioned. That shouldn't be out of the question.
Less of course would be good.
<p> Andy
<br> p.s. if you want to mix and match, buy the accel
<br> single-plane intake. It comes with rails pre-machined
<br> and the bosses are cast and machined into the intake
<br> (and you can buy it separately for $450 from jegs and
<br> summit). Then you get the injectors, harness,
<br> computer, etc that you want. With your setup, the
<br> single-plane will prolly be a better choice for
<br> upper-RPM flow. Maybe not.
<br><br>
The cam operating range is in 2500-6000. That isn't alot or R's.
Plus, I Really want a tuned port setup. (unless I went Velocity stack <grin>)
<br>The installation EMIC place I talked to said that they used a cam simualar
in size in one of their 502 motors with no problems.
<br><b>IF</b> I got this intake, It comes with rails, so I would need a
computer/harness-FP-$2000, injectors-MSD injectors-$$(how much)
<br>Accel ecm distrubutor and , Accel +300 and that would be it right?
<br>( I know I am missing something.)
<p>Chris Lucas
<br>
<br> </html>