<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>On a MAF system, if you UP the fuel pressure 7 - 10
%, and set the flow rate to a value 7 - 10% higher, the 305 injectors will
have the best chance on a un-hotrodded 350 motor IMO. you can add 20% more
FP and mess up idle and cause BLM skewing, and the WOT will have more fuel, or
you can leave the FP alone and idle will be great but WOT may have the injectors
static and still have low o2 readings. Either is a comprimise. 305
to 350 = bit more than 14% more air, need 14% more fuel and thats with no other
intake mods. If you were using 12ms at WOT on the 305 you'll use the same
injectors 14% longer in the 350 - closer to static (or over)</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>dont just change the BPW by 14%, (in a MAF) you'll
do the opposite of what you are after. the injector base PW should be the actual
setting for the injectors used - then you adjust it a bit for more FP.. which
makes the injectors have a higher flow rate than they are "stamped". a better
spray pattern too. On a TPI (not TBI) each of the 8 are rated at 19#/hr
for a 305 and 22#/hr for a 350. 19 * 1.14 = 21.66 amazingly... keeps the
injectors below something like 80% of max duty cycle.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>and you're "off road" so no problem with the
feds.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Please anyone correct anything. I'm not a pro, I
just play one on TV.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>PS - my soon to be dropped-in 383 will start out
with 350 injectors. (MAF too). </FONT></DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A href="mailto:nwester@eidnet.org" title=nwester@eidnet.org>Programmer</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A href="mailto:gmecm@diy-efi.org"
title=gmecm@diy-efi.org>gmecm@diy-efi.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, February 22, 2000 4:46
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> BPW numbers</DIV>
<DIV><BR></DIV>
<DIV><FONT color=#000000 size=2>Greetings guys,</FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>Just wondering what BPW numbers would do when
a guy changes a 305 to a 350. The 1988 TBI injectors are different, PROM BPW
numbers are 148 for a 305 and 135 for </FONT><FONT color=#000000 size=2>a 350.
This is based on flow in grams/sec...what would you have to set a 305 injector
to, to work in a 350 properly -- or is the flow rate too low already
?</FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>Lyndon.</FONT></DIV></BLOCKQUOTE></BODY></HTML>