<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>did a little digging and thinking (not an
electronics whiz). </FONT></DIV>
<DIV><FONT face=Arial size=2>after looking at the disasm. aujp.bin I was
wondering where the # of pulse would be calculated. since it is batch fired the
pulses would be setup for 2(4?) per engine cycle (2- banks). would it be
possible to change it to fire 8 times per cycle? </FONT></DIV>
<DIV><FONT face=Arial size=2>Is there enough time (cpu cycles) to do this at
6000rpm?</FONT></DIV>
<DIV><FONT face=Arial size=2>assuming one could get the correct number of pulses
out---</FONT></DIV>
<DIV><FONT face=Arial size=2>is there a serial buffer that would allow them to
be synched to fire thru an 8-channel mux/demux (switch) or would some sort of
555 triggered count up count down arrangement need to be configured to synch the
pulse.(using tach drive counter for mux/demux with #1TDC reference setup to
reset counter to null).</FONT></DIV>
<DIV><FONT face=Arial size=2>I checked the data sheet for 74hc4051 but am not
familiar with anything beyond simple digital logic circuits</FONT></DIV>
<DIV><FONT face=Arial size=2>and am in the process of trying to find a chip to
synch(buffer) the pulse from the ECM inj. driver. </FONT></DIV>
<DIV><FONT face=Arial size=2>I am assuming static sfi timing(to simplify
it).</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>byE</FONT></DIV>
<DIV><FONT face=Arial size=2>Mike</FONT></DIV>
<DIV><FONT face=Arial size=2>Swayze<BR><A
href="mailto:mswayze@truswood.com">mswayze@truswood.com</A><BR><A
href="mailto:kswayze@bellsouth.net">kswayze@bellsouth.net</A></FONT></DIV></BODY></HTML>