<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2652.35">
<TITLE>RE: Idle and the idle VE table</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>Forgive my ignorance, but why would you lock the BLMs to 128 (outside of WOT mode?) To disable fuel trimming?</FONT>
</P>
<P><FONT SIZE=2>If you want to disable fuel trimming, then why do you care what the INT's are? </FONT>
</P>
<P><FONT SIZE=2>I would disable fuel trimming (by BLMs and INTs) by raising the enable closed loop coolant temperature to something outrageous, if possible. I'm sure there are lots of ways to do it.</FONT></P>
<P><FONT SIZE=2>Hope this is of some help,</FONT>
<BR><FONT SIZE=2>-Christian</FONT>
</P>
<P><FONT SIZE=2>(then again my INTs increase to 132, increment the BLM, then reset to 128, continuing as necessary.)</FONT>
</P>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: Ben [<A HREF="mailto:sappyse107@gmforums.com">mailto:sappyse107@gmforums.com</A>] </FONT>
<BR><FONT SIZE=2>Sent: Monday, September 24, 2001 4:56 PM</FONT>
<BR><FONT SIZE=2>To: gmecm@diy-efi.org</FONT>
<BR><FONT SIZE=2>Subject: Idle and the idle VE table</FONT>
</P>
<BR>
<P><FONT SIZE=2>For those working on the A1 code (or any other), have you figured out what the heck needs to be changed to get the idle BLM and INT right? No matter what I change, the idle INT goes up to 156 (I have BLM locked at 128 since everything else is reasonable now). I have raised the idle ve table (double), with the int going to 180 still. I have changed the spark table which helped but I can't go far with it. The base VE table doesn't effect it either.</FONT></P>
<P><FONT SIZE=2>Im pretty pissed of at it cause I don't know what to do and ive been messing with just about every table I can find that could relate to idle.</FONT></P>
<P><FONT SIZE=2>Ben</FONT>
<BR><FONT SIZE=2>91 Grand Prix SE 3.1 Modified</FONT>
<BR><FONT SIZE=2>92 Grand Prix SE 3.4 Project</FONT>
</P>
<P><FONT SIZE=2>----------------------------------------------------------------------------</FONT>
<BR><FONT SIZE=2>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes) in the body of a message (not the subject) to majordomo@lists.diy-efi.org</FONT></P>
</BODY>
</HTML>