Injector supply voltage & positioning.

[Michael F. Sargent]

The best reason I've heard for running an injector at full supply voltage
(which will probably be around 14 volts when running) is that the higher
voltage allows the injector to open faster, allowing better control when
short pulse widths are required (idle, and light load cruising).

Mike
+--------------------------------------------------------------------------+
| Michael F. Sargent   | Net: msargent at gallium.com | Phone: 1(613)721-0902 |
| Gallium Software Inc.|                           | FAX:   1(613)721-1278 |
+--------------------------------------------------------------------------+