GM mass airflow sensors for sale

[Bill Lewis]

I have two used GM mass airflow sensors for sale.  They are logically
from an '86 or so Chevy 305 or 350 Tuned Port motor.  They are 
manufactured by Bosch.

They have a 70mm inside diameter and accept an 80mm diameter boot.
I have the connector pigtail.    One of the protective end screens
has a small tear.

I also have an air cleaner I machined up to use with these during
my experiments.  It is basically two aluminum end plates,
separated by steel rod strechers and uses the filer element
from an early Porsche 911. I have a rubber boot from a BMW
about 6 inch free length that connects the air cleaner to the
MAF sensor.  It's not untralight, so shipping that may cost a wee 
bit, but I'll throw it in free with the sensors.

I also have a set of 8 injectors from the same engine.  They are the 
high impedance style intended to be run with 12 volts.  I don't know
if they are from a 305 or 350 (or even if there's a difference).
They came from a running engine and have been stored in the house
(for about 8 years), but beyond that I can't guarantee them.

I'm not trying to get rich off these parts.  I'm cleaning house and 
want to see them go to a good home.  Make me an offer.

Bill (bill at wrljet.com)