switching between EPROMS

[Todd Knighton]

Sandy wrote:
> 
> You could also buy a ROM simulator, and just change the needed values. I
> have the DATAMAN S3, and it is a bit overkill, but you can plug it into a
> byte wide rom socket, and change blocks of memory if needed. You could also
> get a low cost plug in simulator, and use a laptop to change much of what
> you need.
> 
> Sandy

Or even better is the Unirom, by Tech Tools, it will allow code changes
on the fly.  I've also got a Dataman, but S4 not S3, and it's a great
tool, but to make changes, you need to shut the engine down.

Todd Knighton
Protomotive Engineering