How to get ECU processor info?

[Wade T. Braden]

        Motorola designed the MC68HC11 for GM to use in the ECM. I do not
know if GM is still using the HC11 today. 
 
At 01:46 PM 12/11/96 -0500, you wrote:
>Hi All.
>
>A few of us from the Talon Digest are trying to get information on the uP (& 
>its instruction set) for the 2nd generation Mitsubishi Eclipse / Eagle Talon 
>turbo model ECU. Although it's apparently a proprietary chip(set), various 
>other folks have somehow come up with this info. (Unfortunately, those same 
>folks are generally unwilling to pass it around.)
>
>If you have managed to come up with such information for *ANY* ECU and have 
>some tips/pointers to share, they would be most highly appreciated!
>
>Thank you,
>/Scott Ritter
>--------
>"In the beginning was the thing. Then one thing led to another." T.R.
>
>
   -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
	  Wade T. Braden          Email:  wbraden at ryker.itech.cup.edu
          408 Burton Ave.         Web: http://www.itech.cup.edu/~wbraden/      
        Washington, PA 15301      Major: Electrical Engineering Tecnology	   
          (412)222-8964           at California University of PA
   -=-=-=-=-=-=--=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-