Weber injector and computer questions for motorcycles.

[jon.wright at email.ends.com]

I have a couple of questions concerning some very specific fuel injection 
applications forwarded to me from a friend:

Does anyone happen to know the scheme Weber uses to identify the various 
characteristics of their injectors, specifically the injector capacity?  He 
is familiar with the mapping of durations, etc., but evidently there are 
different injectors identified by their coloration (anodizing?) and wanted 
to find a table or spec sheet on the various ones Weber uses.  He could 
also use Bosch injectors in a pinch.  For some reason, he cannot acquire 
this info directly from Weber.

The second question concerns the diagnosis and repair of the P7 computer.  
The suspected flaw at this point is a cracked motherboard or broken trace 
but it shows no visible cracks.  Does anyone know of a person that is handy 
at tracking down problems like these?  For that matter, does anyone on this 
list do this sort of thing?  He already knows FIM in Australia do, but he'd 
certainly like to find somebody closer here in Southern California.

Thanks for any info y'all can come up with.

Ciao.

Jon Wright

====================================================================== 
jon.wright at ends.com