New BMW ECU

[Land Shark]

At 07:17 7/3/96 +0200, you wrote:

>Yup, you are correct Jim, there is a flash in the Siemens ECU, and it was
>soldered. I removed the flash eeprom which was a 29C512 and with an adapter
>socket, successfully converted the code over to a 27C512 EPROM.(Not that this
>was really important as I could just as easily reprogrammed this flash or
>any other
>29C512 flash for that matter) My main problem is the data area's which I am
>familiar with (Bosch Mortonic) have now obviously changed. I was curious to
>know 
>if anyone else out there has managed to get any usefull info on this unit, which
>would allow modification to the usual settings.

 Describe the processor .. it may be a Siemens 80C166

 If you can, just EMAIL me the binary, and I'll try
 and tell you what it is ..

 I'm working on the Siemens MS41.1 now ..

 Jim