FW: MAP
Todd Knighton
knighton at net-quest.com
Sat Oct 5 03:54:05 GMT 1996
Mark,
We use the MPX4250A, it's an absolute 0 to 250 kpa pressure transducer
that's temperature trimmed and compensated.
We place the sensor in the computer and run a small vacuum hose to it
so you don't have to worry about fires and such, as well as the thing I
think is safe up in the 5 to 10 bar range, so don't worry about back
fires either.
If you need an normally aspirated one use the MPX4100A, I think that's
the number, it's 0 to 100 kpa, so absolute vacuum to atmospheric,
depending on where you're at.
The data sheets are available at the MOTOROLA web site.
http://www.mot.com/
Good luck
Todd Knighton
Protomotive Engineering
Mark Pitts wrote:
>
> Got the part # Todd? And possibly the URL for some info on it?
> Thanks alot
> Mark
> ----------
More information about the Diy_efi
mailing list