conversion factors
Martin Scarr
martins at efn.org
Thu Oct 17 22:47:58 GMT 1996
On Thu, 17 Oct 1996, Stephen Dubovsky wrote:
> At 11:35 AM 10/17/96 -0700, you wrote:
> >What are the conversions between the various pressure measurement units,
> >e.g., kPa to PSI and what are the definitions of the units, e.g., PSI=pounds
> >per square inch? me
> >
>
> The easiest way to deal in US/metric units is to use something like
> MathCAD. It has built in conversions for almost everything (and is handy
> for alot of other calculations). So here is what it said:
>
> 1 atm = 14.696 psi
> = 101.325 kPa
> = 29.921 in_Hg
> = 760.002 torr (= mm_Hg = mbar)
> = 1.013*10^5*kg/(m*s^2)
> I dont have the conversion for in_H2O... (although is can be converted from
> in_Hg if you have enough info about each)
>
I believe it's 1 atm = 407.1 inches of water
Martin Scarr
More information about the Diy_efi
mailing list