Injector Flow Variation

[Mark Pitts]

Is it worth testing them on the bench, flowing at 20%, 40% 60% and 80% =
flows for a while, and actually seeing how much they flow, and putting =
the adjustment into the code????


Comments please... as I've never really thought about this bit of =
potentially disastrous mismatch.


Mark


----------
From:  Greg Finnican[SMTP:f0247 at vnet.net]
Sent:  Saturday, September 07, 1996 6:22 PM
To:  diy_efi at coulomb.eng.ohio-state.edu
Subject:  Injector Flow Variation

What an injector's flow rating is and what it actually flows can vary=20
quite a bit.  When we ultrasonicly clean them it does not always bring=20
them back in line.  How much of this is manufacturing variation?  After=20
seeing the variation in injectors I can'nt imagine using an untested set =

in a performance application - certainly not a used set.  I would like =
to=20
hear others experience.  greg at atlantic-motorsports.com