G-Tech meter

[Bruce Bowling]

> 
> Drag-strip testing with the G-Tech Pro's have shown that they're
> consistently off.  Each unit's variance differs, but it's consistently off
> in the 1/4 ET and MPH (it's usually a little low on the ET and ~2 MPH high
> in the MPH).
> 
> 
There are going to be off for many reasons. One big reason is that
none of these systems perform any type of environmental correction,
so trying to get any absolute numbers out will not work. For relative
comparisons, they are O.K., as long as the test environments stay
the same.

- Bruce

--
-----------------------------------------------------
<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-----------------------------------------------------
                 Bruce A. Bowling
                 Staff Scientist
   Thomas Jefferson National Accelerator Facility
    12000 Jefferson Ave - Newport News, VA 23602
                 (804) 249-7240
bowling at cebaf.gov  http://devserve.cebaf.gov/~bowling
-----------------------------------------------------
<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-----------------------------------------------------