80535 as controller

[Sandy]

I have an 80c535 board that I might part with if anyone is interested. 

Sandy

At 10:50 AM 8/12/97 +1000, you wrote:
>
>dusher at emarkt.com wrote:
>
>>Hi all
>
>>        Is anyone thinking or using the Seimens 80c535 (8051'MCS52
>>        instuction set')?. Would like to hear if anyone is interested
>>        in using this chip!. any ideas?..bye 
>
>I've got a 80C552 (Philips 8051) board nearly routed, and the way 
>things are going, it should be controlling an engine by the year 2010 
>or so.. I seem to remember the 80C535 has a similar set of capture 
>and compare registers to the 80C552.
>Another alternative is the Siemens 80C537. There is an 80C537 SBC 
>design in the June 1997 issue of Elektor magazine. It has all the 
>features of the 552, as well as running twice as fast, and having a 
>nifty 16 bit multiplication/division unit. It looks like the ducks 
>guts for engine management. I might get one if the 552 board doesn't 
>work.
>
>
>===========================================
>Stuart Baly (s.baly at bom.gov.au)
>Technical Officer
>Cape Grim Baseline Air Pollution Station
>Cape Grim, Tasmania, Australia
>===========================================
>
>