DIY injector cleaning

[Scott Linder]

Andris Skulte wrote:

> Scott Linder wrote:
> > Kevin Vannorsdel wrote:
> > > Is there a decent DIY method to clean and/or rebuild GM fuel injectors   (TBI
> > > in my case) ??
>
> > As a fuel injector reconditioner we recondition the tbi units for $ 24.95 each
> > plus ups back to you. We remove screens and o-rings , reverse flush and ultrasonically clean with
> > flush. Reinstall new filter baskets with new orings and flow test for matching.
>
> I think the DIY part was the important section. Removing o-rings and
> screens is the easy part. How would you reverse flush it? I assume you
> just run the injector in the open position and run pressure from the
> outlet side of the injector? Regarding the ultrasonic cleaning... Could
> I just put the injectors in the cleaner bath, and run the machine?
> Thanks for hopefully answering the questions :)
>
> Andris

 Andris,
i guess the answer was NO there isnt a GOOD way for the DIY to clean injectors other than a additive in
the tank.

Jimm L.
the injector " guru"