December 1997 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Dec 1 01:47:41 GMT 1997
Ending: Wed Dec 31 22:26:19 GMT 1997
Messages: 828

• turbo sizing   A70Duster
• turbo a 2 stroke 2 cylinder   A70Duster
• Need conversion equation for PS, HP, and kW   Gerald San Agustin
• Home DYNO   Justin Albury
• GM ALDL interface   Justin Albury
• cleaning injectors   Justin Albury
• Diacom   Justin Albury
• a new guy to efi   Dave J. Andruczyk
• TEST   Dave J. Andruczyk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Andy
• turbo sizing   Stuart Baly
• DIY_EFI Digest V2 #437   Matt Beaubien
• Abrasive flow finishing   Corey & Alicia Beaverson
• alternative fuel/stupid idea?   Joe Boucher
• GM ECM TBI Questions   Joe Boucher
•   Joe Boucher
• "Tunable TBI Iinjectors"   Joe Boucher
• Wiring Pinout   Joe Boucher
• GM ECM TBI Questions with more information   Joe Boucher
•   Joe Boucher
• Fuel pump questions   Joe Boucher
• GM ALDL interface   Joe Boucher
• Need conversion equation for PS, HP, and kW   Joe Boucher
• Fuel pump questions   Joe Boucher
• cleaning injectors   Joe Boucher
• Fuel pressure regulators, was Re: Fuel pump questions   Joe Boucher
• Porsche VSS   Joe Boucher
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern? (not related   Joe Boucher
• BOP   Joe Boucher
• safety...in - line fuel pump   Joe Boucher
• Injector Recommendations   James Boughton
• New to the Group   James Boughton
• IAC   James Boughton
• EFI to replace Mechanical injection   James Boughton
• Fuel pump questions   James Boughton
• Fuel pump questions   James Boughton
• IAC   James Boughton
• Stumped by TPI   James Boughton
• Dash-board C++ library   Bruce Bowling
• DIY injector cleaning   Bruce Bowling
• DIY injector cleaning   Bruce Bowling
• DIY injector cleaning   Bruce Bowling
• Fuel pump questions   Bruce Bowling
• Fuel pump questions   Bruce Bowling
• A repost   Bruce Bowling
• A repost   Bruce Bowling
• A repost   Bruce Bowling
• A repost   Bruce Bowling
• Air/Fuel Ratio.   Bruce Bowling
• Abrasive flow finishing   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• GM ALDL interface Schematic   Frederic Breitwieser
• IAC   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Ford vs GM in the ECM wars.   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• Fuel pump questions   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• a new guy to efi   Frederic Breitwieser
• IAC   Frederic Breitwieser
• cleaning injectors   Frederic Breitwieser
• Fuel pressure regulators, was Re: Fuel pump questions   Frederic Breitwieser
• GM ALDL interface   Frederic Breitwieser
• cleaning injectors   Frederic Breitwieser
• Fuel pressure regulators, was Re: Fuel pump questions   Frederic Breitwieser
• crank fuse   Frederic Breitwieser
• Fuel resivoir/tank baffles   Frederic Breitwieser
• GM ALDL interface - Drawing1.jpg   Frederic Breitwieser
• Hexidecimal   Frederic Breitwieser
• a new guy to efi   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• Injector resistance.   Frederic Breitwieser
• Knock alarm   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• software source   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• BOP   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• software source   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• BOP Apologies   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• ALDL Project   Frederic Breitwieser
• New Website Location   Frederic Breitwieser
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Frederic Breitwieser
• 3.0L Manual   Frederic Breitwieser
• HC sensor - in australia   Bruno!
• Fuel pressure regulators, was Re: Fuel pump questions   Christopher Bruno
• fuzzy logic controllers   Christopher Bruno
• Broadcast codes...   Christopher Bruno
• turbo sizing   Christopher Bruno
• Wiring Pinout   Christopher J. Bruno
• DIY injector cleaning   Christopher J. Bruno
• GM ALDL interface   Christopher J. Bruno
• Fuel pump questions   Christopher J. Bruno
• Need conversion equation for PS, HP, and kW   Christopher J. Bruno
• Vaccum advance tap points   Tony Bryant
• Fuel pressure regulators   Tony Bryant
• A repost   Tony Bryant
• A repost   Tony Bryant
• Repost   Tony Bryant
• Knock alarm   Tony Bryant
• GM 350: Batch vs sequuential & ALDL questions   Daniel Burk
• Secondary metering rod codes   Daniel Burk
• ALDL resistive control and PWM control classes   Daniel Burk
• crank fuse   Carmine
• crank fuse   Carmine
• crank fuse   Carmine
• crank fuse   Carmine
• Diacom   Carmine
• GM ecm on Ford??   Dale and Donna Carmine
• Hexidecimal   John Carroll
• test   David Chambers
• Seeking Double E.   Joe Chiasson
• Liquid Propane Injection help!!!   Joe Chiasson
• Liquid Propane Injection help!!!   Joe Chiasson
• Injector resistance.   Joe Chiasson
• Injector resistance.   Joe Chiasson
• Injector resistance.   Joe Chiasson
• GM ALDL interface   Chief
• GM ALDL interface   Chief
• GM Tranny Bolt Patterns   Chief
• ALDL Project   Chief
• safety...in - line fuel pump   Chief
• ALDL Project   Chief
• GM Tranny Bolt Patterns   Chief
• eec-iv info (11-25)   Tom Cloud
• Wiring Pinout   Tom Cloud
• what the deuce is a DUCE ??   Tom Cloud
• eec-iv info (11-25)   Tom Cloud
• eec-iv info (11-25)   Tom Cloud
• great Ford site   Tom Cloud
• DIY injector cleaning   Tom Cloud
• Patent Numbers   Tom Cloud
• Patent Numbers   Tom Cloud
• IAC   Tom Cloud
• IAC   Tom Cloud
• IAC   Tom Cloud
• IAC   Tom Cloud
• Fuel pump questions   Tom Cloud
• Fuel pump questions   Tom Cloud
• GM ecm on Ford??   Tom Cloud
• IAC   Tom Cloud
• Wanted: Analog Pro-Jection   Tom Cloud
• Low voltage guage   Tom Cloud
• oxygen sensor readings   Tom Cloud
• software source   Tom Cloud
• Injector resistance.   Tom Cloud
• Injector resistance.   Tom Cloud
• Hey U F'er try DIS: hohoho.exe   Tom Cloud
• Knock alarm   Chris Conlon
• Abrasive flow finishing   Chris Conlon
• Eprom   Brad Cooper
• Eprom   Brad Cooper
• Intake manifold   Brad Cooper
• Address   Brad Cooper
• Address   Brad Cooper
• Eprom   Brad Cooper
• Address   Brad Cooper
•   Brad Cooper
• Address   Brad Cooper
• GM ALDL interface   Brad Cooper
• Address   Brad Cooper
• Another New EFI Person   Brad Cooper
• ALDL monitoring   Brad Cooper
• Diacom   Brad Cooper
• Diacom   Brad Cooper
• aldl cable   Brad Cooper
• Patent Numbers   Tony Cooper
• a new guy to efi   Tony Cooper
• Fuel pump questions   Tony Cooper
• a new guy to efi   Tony Cooper
• Knock alarm   Tony Cooper
• Knock alarm   Tony Cooper
• Abrasive flow finishing   Tony Cooper
• CR Ratio ?   Tony Cooper
• AIC   Tony Cooper
• AIC   Tony Cooper
• AIC   Tony Cooper
• CR Ratio ?   Tony Cooper
• test   Tony Cooper
• TEST   Tony Cooper
• Abrasive flow finishing   Gordon Couger
• Abrasive flow finishing   Gordon Couger
• O-Scope   Gordon Couger
• test equipment   Gordon Couger
• Injector Firing   Kevin Crain
• Kevin Vannorsdel/San Jose/IBM is out of the office.   D03NM061/03/M/IBM
• Fuel pump questions   George M. Dailey
• GM Tranny Bolt Patterns   George M. Dailey
• GM Tranny Bolt Patterns   George M. Dailey
• Ignition question   John Dammeyer
• Ignition question   John Dammeyer
• MAF vs Speed Density   Dan
• Abrasive flow finishing   Dan
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Peter Datcuk
• safety...in - line fuel pump   Peter Datcuk
• Another New EFI Person   David
• software source   David
• Another New EFI Person   David
• GM Tranny Bolt Patterns   Jim Davies
• MAP+fuel maps   Jim Davies
• raw gauge mechanisms   DemonTSi
• Fuel pump questions   Gary Derian
• Need conversion equation for PS, HP, and kW   Gary Derian
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Gary Derian
• BOP   Gary Derian
• Stumped by TPI   Gary Derian
• Abrasive flow finishing   Gary Derian
• alternative fuel/stupid idea?   Shannen Durphey
• Address   Shannen Durphey
• DIY injector cleaning   Shannen Durphey
• alternative fuel/stupid idea?   Shannen Durphey
• Address   Shannen Durphey
• [Fwd: CFM numbers]   Shannen Durphey
• Rochester Quadrajet Jetting question (sorry, non-EFI)   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• EE Help on FORD MECS   Shannen Durphey
• Fuel resivoir/tank baffles   Shannen Durphey
• Fuel pump questions   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• BOP   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• Injector resistance.   Shannen Durphey
• Stumped by TPI   Shannen Durphey
• GM Tranny Bolt Patterns   Shannen Durphey
• Injector resistance.   Shannen Durphey
• Injector resistance.   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Shannen Durphey
• GM Saginaw Fuel Line Fittings   Shannen Durphey
• GM Saginaw Fuel Line Fittings   Shannen Durphey
• GM Tranny Bolt Patterns   Shannen Durphey
• Injector Firing   Shannen Durphey
• GM/Delco chip numbers   Shannen Durphey
• Patent Numbers   Ed
• Fuel pump questions   Ed
• Need conversion equation for PS, HP, and kW   Ed
• Fuel pressure regulators, was Re: Fuel pump questions   Ed
• Fuel pressure regulators, was Re: Fuel pump questions   Ed
• Fuel pressure regulators, was Re: Fuel pump questions   Ed
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Ed
• Fuel pump questions   Mark Eidson
• Fuel pump questions   Mark Eidson
• Injector Duty Cycle?   Eric Ekberg
• oxygen sensor readings   Eric Ekberg
• oxygen sensor readings   Eric Ekberg
• checksum thanks (fwd)   Orin Eman
• H*lp justin   Orin Eman
• conn.gif   Orin Eman
• Low voltage guage   Orin Eman
• Injector Duty Cycle?   Orin Eman
• Fuel pump questions   Orin Eman
• Hexidecimal   Orin Eman
• Low voltage guage   Orin Eman
• Hexidecimal (fwd)   Orin Eman
• oxygen sensor readings   Orin Eman
• TEST   Orin Eman
• GM ALDL interface   Bill Eubank
• Glossary   Niels Ezerman
• crank fuse   Mark Fabiny
• GM/Delco chip numbers   Mike Fahrion
• Dash-board C++ library   Michael Farrugia
• Injector resistance.   Michael Farrugia
• Injector resistance.   Michael Farrugia
• Injector resistance.   Michael Farrugia
• GM ALDL interface   Scott Feaver
• GM ALDL interface   Scott Feaver
• GM ALDL interface   Scott Feaver
• IAC ford or chev   Fisystems
• GM Saginaw Fuel Line Fittings   Fisystems
• eec-iv publication by TOM.   Bernt Frisk
• TEST   Bernt Frisk
• thanks all   Bernt Frisk
• oxygen sensor readings   GRUMPYNOMO
• what is good oxygen sensor reading   GRUMPYNOMO
• Secondary metering rod codes   King Galadar
• Abrasive flow finishing   Robert Gallant
• IAC   Robert Gallant
• AIC   Robert Gallant
• AIC   Robert Gallant
• Injector resistance.   Garfield
• Stumped by TPI   Garfield
• Injector resistance.   Garfield
• Injector resistance.   Garfield
• 700R4 (4L60)   Ron Gregory
• GM TPI   Andrew F. Gunnesch
• crank fuse   Andrew F. Gunnesch
• safety...in - line fuel pump   Andrew F. Gunnesch
• GM Tranny Bolt Patterns   Andrew F. Gunnesch
• GM Tranny Bolt Patterns   Andrew F. Gunnesch
• (Fwd) Re: 700-R4 torque converter info   Andrew F. Gunnesch
• Injector Firing   Andrew F. Gunnesch
• [admin] List services (automated monthly post)   John S Gwynne
• New member   H8carbs
• Stumped by TPI   H8carbs
• ALDL monitoring   H8carbs
• ALDL monitoring   H8carbs
• converting a toyota to gm fuelinj?   H8carbs
• AIC   H8carbs
• Needham's Phone Number   H8carbs
• Advice and suggestions?   Joshua Hadler
• Advice and suggestions?   Joshua Hadler
• Abrasive flow finishing   Robert Harris
• Abrasive flow finishing   Robert Harris
• Diacom   Terry Hartman
• safety...in - line fuel pump   Terry Hartman
• alfa twin cam   Carter Hendricks
• ALDL monitoring   John Hess
• Fuel pump questions   Allan Hines
• GM ECM TBI Questions   Al Hunt
• GM ECM TBI Questions with more information   Al Hunt
• Archive for this Group   Glenn Ingram
• GM ECM TBI Questions   JET
• GM ECM TBI Questions with more information   JET
• EE Help on FORD MECS   GUTHRIE JOSEPH
• Abrasive flow finishing   William T Jenkins
• EE Help on FORD MECS   Mike Jones
• PS   Peter Katzmann
• Air/Fuel Ratio.   Shem Yuen Kheong
• 68764C   Nicole Lacasse
• Turbo Fiero (was Re: checksum thanks)   Ludis Langens
• GM ALDL interface   Ludis Langens
• GM ALDL interface   Ludis Langens
• GM ALDL interface   Ludis Langens
• GM ALDL interface   Ludis Langens
• tachometer question v8-v6   Ludis Langens
• 68764C   Ludis Langens
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Ludis Langens
• Broadcast codes...   Ludis Langens
• Stumped by TPI   Ludis Langens
• Stumped by TPI   Ludis Langens
• Broadcast codes...   Ludis Langens
• CALPAK (was: Broadcast codes...)   Ludis Langens
• A repost   Richard J Lebens
• Injector Recommendations   Steve Leonard
• General Thanx   Steve Leonard
• Injector Recommendations   Steve Leonard
• General Thanx   Steve Leonard
• Abrasive flow finishing   Steve Leonard
• CR Ratio ?   Steve Leonard
• Fuel pump selection   Brian Lewis
•   Scott Linder
• Intake manifold   Scott Linder
• DIY injector cleaning   Scott Linder
•   Scott Linder
• Wiring Pinout   Scott Linder
• DIY injector cleaning   Scott Linder
• DIY injector cleaning   Scott Linder
• Injector Recommendations   Scott Linder
• '93 T/A cal-pak bin   Terry Martin
• Wiring Pinout   Terry Martin
• GM ECM TBI Questions   Terry Martin
• GM ALDL interface   Terry Martin
• Hexidecimal   Terry Martin
• Abrasive flow finishing   Terry Martin
• Injector resistance.   Terry Martin
• Abrasive flow finishing   Terry Martin
• Newbie   Matthews, Sam
• Throttle plates.   Rich Mauruschat
• oxygen sensor readings   Rich Mauruschat
• No Subject   Rich Mauruschat
• Fuel pump questions   Ken Mayer
• alternative fuel/stupid idea?   Gordon McKenzie
• Low voltage guage   Gordon McKenzie
• Fuel pump questions   Gordon McKenzie
• Fuel pump questions   Gordon McKenzie
• Fuel pump questions   Gordon McKenzie
• EFI to replace Mechanical injection   Mk2vitesse
• Porsche VSS   Charles Morgan
• General Thanx   Dave Morrill
• turbo sizing   Dave Morrill
• turbo sizing   Dave Morrill
• test equipment   Chris Morriss
• test equipment   Chris Morriss
• New to the Group   Steve N
• EFI questions   Steve N
• TEST   Roger Nehls
• 1984 Pontiac TA ALDL Specs   Carmine Nicoletta
• crank fuse   Carmine Nicoletta
• GM ALDL interface - Drawing1.jpg   Carmine Nicoletta
• 1K Prom for GM   Steve Ochs
• GM Tranny Bolt Patterns   Steve Ochs
• GM Manual Info   Steve Ochs
• DIY_EFI Digest V2 #455   Steve Ochs
• 3.0L Manual   Steve Ochs
• Diacom   Steve Ochs
• FWD vs. RWD patterns   Steve Ochs
• DIY_EFI Digest V2 #455   Steve Ochs
• 700-R4   Steve Ochs
• remove   Stefan Olsson
• Leaking Injectors??   Jesse R. Ortiz
• Splitting Injectors??   Jesse R. Ortiz
• Aftermarket EFI systems?   Jesse R. Ortiz
• Hi-Output Quad 4   Frank F Parker
• GM Tranny Bolt Patterns   Frank F Parker
• a new guy to efi   Paul
• AIC   Paul
• AIC   Paul
• Patent Numbers   Thomas Pedersen
• Knock alarm   David Piper
• GM Saginaw Fuel Line Fittings   David Piper
• AIC   David Piper
• EFI kits?   Jay Pisarri
• Fuel pump questions ...????   Simon Quested
• Need conversion equation for PS, HP, and kW   Simon Quested
• converting a toyota to gm fuelinj?   Duane Reed
• GM ALDL interface   Steven B Reed
• tuning EFIs   Danilo C. Ribeiro
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Mark Romans
• Needham's Phone Number   Mark Romans
• Eprom   Jennifer Rose
• wiring pin out   Jennifer Rose
• Eprom   Jennifer Rose
• eprom   Jennifer Rose
• eprom   Jennifer Rose
• eprom   Jennifer Rose
• GM TPI   Jennifer Rose
• GM ALDL interface   Jennifer Rose
• tachometer question v8-v6   Jennifer Rose
• Hexidecimal   Jennifer Rose
• Gas Tanks   Jennifer Rose
• Need Vette GURU.....   Paul Ruschman
• Dash-board C++ library   Sandy
• tachometer question v8-v6   Sandy
• Injector resistance.   Sandy
• Stumped by TPI   Jim Santoro
• Stumped by TPI   Jim Santoro
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terry Sare
• software source   Michael F. Sargent
• 68764C   Scott Schaaf
• GM/Delco chip numbers   Scott Schaaf
• GM ALDL interface   Seanster
• Liquid Propane Injection help!!!   Gavin Shafer
• Liquid Propane Injection help!!!   Gavin Shafer
• Another New EFI Person   Gavin Shafer
• test equipment   Gavin Shafer
• New to the Group   Jody Shapiro
• tuning EFIs   Land Shark
• Subaru ECU question   Land Shark
• TEST   Lance Shiells
• 68764C   Peter Shoebridge
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• FWD Transaxles   Sketch
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Sketch
• FWD vs. RWD patterns   Sketch
• safety...in - line fuel pump   Sketch
• Plenum Area   Andris Skulte
• DIY injector cleaning   Andris Skulte
• "Tunable TBI Iinjectors"   Andris Skulte
• Leaking Injectors??   Andris Skulte
• Haltech F3   Andris Skulte
• MAP+fuel maps   Andris Skulte
• Abrasive flow finishing   Andris Skulte
• 305 from hell was Re: MAP+fuel maps   Andris Skulte
• 305 from hell was Re: MAP+fuel maps   Andris Skulte
• EFI kits?   Clare Snyder
• Fuel pump questions   Clare Snyder
• Fuel pump questions   Clare Snyder
• Fuel pump questions   Clare Snyder
• Fuel pressure regulators, was Re: Fuel pump questions   Clare Snyder
• fuzzy logic controllers   Clare Snyder
• EE Help on FORD MECS   Clare Snyder
• Broadcast codes...   Clare Snyder
• software source   Clare Snyder
• safety...in - line fuel pump   Clare Snyder
• safety...in - line fuel pump   Clare Snyder
• Rochester Quadrajet Jetting question (sorry, non-EFI)   Jay Snyder
• Re2: Rochester Quadrajet Jetting question (sorry, non-EFI)   Jay Snyder
• Modifying 94-95 Acura Integra OEM ECUs   Jerome Soh
• IAC   Mikey B Sorensen
• Gas Tanks   Mikey B Sorensen
• GM ALDL interface   Squash
• IAC   Squash
• IAC   Squash
• Fuel pump questions   Squash
• Fuel pump questions   Squash
• Fuzzy Logic   Squash
• IAC   Squash
• Wanted: Analog Pro-Jection   Squash
• Fuel resivoir/tank baffles   Squash
• oxygen sensor readings   Squash
• oxygen sensor readings   Squash
• Broadcast codes...   Squash
• MAP+fuel maps   Squash
• MAP+fuel maps   Squash
• 305 from hell was Re: MAP+fuel maps   Squash
• 305 from hell was Re: MAP+fuel maps   Squash
• 305 from hell was Re: MAP+fuel maps   Squash
• GM TPI   Dorothy Streich
• Eprom   Carl Summers
• Address   Carl Summers
• Address   Carl Summers
• Address   Carl Summers
• Address   Carl Summers
•   Carl Summers
•   Carl Summers
• 1200 cc/m inj price ?   Carl Summers
• Address   Carl Summers
• Address   Carl Summers
• GM TPI   Carl Summers
• Ignition question   Carl Summers
• Rochester Quadrajet Jetting question (sorry, non-EFI)   Carl Summers
• Fuel pump questions   Carl Summers
• tachometer question v8-v6   Carl Summers
• tachometer question v8-v6   Carl Summers
• Fuel pressure regulators, was Re: Fuel pump questions   Carl Summers
• Fuel pressure regulators, was Re: Fuel pump questions   Carl Summers
• Fuel pressure regulators, was Re: Fuel pump questions   Carl Summers
• Fuel pressure regulators, was Re: Fuel pump questions   Carl Summers
• Fuel pressure regulators, was Re: Fuel pump questions   Carl Summers
• 68764C   Carl Summers
• 68764C   Carl Summers
• Another New EFI Person   Carl Summers
• 68764C   Carl Summers
• software source   Carl Summers
•   Carl Summers
• Broadcast codes...   Carl Summers
• Eprom's pinouts   Carl Summers
• tuning EFIs   Carl Summers
• tuning EFIs   Carl Summers
• tuning EFIs   Carl Summers
• Broadcast codes...   Carl Summers
• GM/Delco chip numbers   Carl Summers
• Turbo Sunbird   Carl Summers
• alfa twin cam   JOHN THACKER
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Matt Teagarden
• GM Tranny Bolt Patterns   Matt Teagarden
• files   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• New to the Group   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• GM ALDL interface   Terryk
• tachometer question v8-v6   Terryk
• tachometer question v8-v6   Terryk
• 68764C   Terryk
• 68764C   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• BOP   Terryk
• GM Tranny Bolt Patterns   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Terryk
• Diacom   Terryk
• 3.0L Manual   Terryk
• Eprom's pinouts   George Theologitis
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Paul Tholey
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Paul Tholey
• Injector resistance.   Paul Tholey
• alternative fuel/stupid idea?   James Tidwell
• Fuel pump questions   James Tidwell
• Fuel pump questions   James Tidwell
• Fuel pump questions   James Tidwell
• Fuel pump questions   James Tidwell
• Intake manifold   Alain Toussaint
• Hexidecimal   Alain Toussaint
• A repost   Alain Toussaint
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern? (not related tought)   Alain Toussaint
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   Alain Toussaint
• MAP+fuel maps   Alain Toussaint
• 3.0L Manual   Alain Toussaint
• CR Ratio ?   Alain Toussaint
• GM ALDL interface (a bit too late reply,but very interresting)   Alain Toussaint
• turbo sizing   Alain Toussaint
• 3.0L Manual   Alain Toussaint
• AIC   Alain Toussaint
• Archive access   Alain Toussaint
• software source   Mike Trusty
• Abrasive flow finishing   Tuck
• Abrasive flow finishing   Tuck
• DIY injector cleaning   Tuck
• eprom   Ron Tyler
• Another New EFI Person   Ron Tyler
• AIC   Ron Tyler
• GM Tranny Bolt Patterns   Bob Valentine
• No Subject   Kevin Vannorsdel
• Address   Kevin Vannorsdel
• Address   Kevin Vannorsdel
• Basic PROM question   Kevin Vannorsdel
• Patent Numbers   Kevin Vannorsdel
• IAC   Kevin Vannorsdel
• IAC   Kevin Vannorsdel
• Need conversion equation for PS, HP, and kW   Kevin Vannorsdel
• Fuel pump questions   Kevin Vannorsdel
• Data Sheets LM1819...   Kevin Vannorsdel
• Gas Tanks   Kevin Vannorsdel
• Broadcast codes...   Kevin Vannorsdel
• Knock alarm   Kevin Vannorsdel
• Broadcast codes...   Kevin Vannorsdel
• Broadcast codes...   Kevin Vannorsdel
• GM/Delco chip numbers   Kevin Vannorsdel
• a new guy to efi   Chris Vondrachek
• 914 injection   Wouter de Waal
• Hexadecimal   Wouter de Waal
• Need conversion equation for PS, HP, and kW   Jay Wallace
• PS (pun intended)   Jay Wallace
• fuzzy logic controllers   Jay Wallace
• Interesting web site   John Webb
• Ignition question   Ron & Cathy Webb
• GM ALDL interface   Ron & Cathy Webb
• Subaru ECU question   Ron & Cathy Webb
• Turbo Sunbird   Michael J Weber
• EFI kits?   James Weiler
• cleaning injectors   James Weiler
• tuning EFIs   James Weiler
• safety...in - line fuel pump   James Weiler
• Opel/Vauxhall´s unconnected socket in the engine bay   Alexander Wenning
• tuning EFIs   Alexander Wenning
• Opel/Vauxhall's unconnected socket in the engine bay   Alexander Wenning
• TEST   Phil Wiggins
• TEST   Phil Wiggins
• Abrasive flow finishing   Dave Williams
• Need conversion equation for PS, HP, and kW   Dave Williams
• Need conversion equation for PS, HP, and kW   Dave Williams
• a new guy to efi   Dave Williams
• FWD vs. RWD patterns   Dave Williams
• Delco Memcal -suit Piazza   Tim Willis
• Mechanical FI and Unleaded...   Paul Witek
• GM Tranny Bolt Patterns   John Zarli
• motronic   Mark_Lloyd at amat.com
• PS   Mark_Lloyd at amat.com
• GM ALDL interface   nospan at anywhere.usa
• Eprom   Fisystems at aol.com
• Plenum Area   HeinGer at aol.com
• alternative fuel/stupid idea?   Roccet at aol.com
• EPROM/CALPAK   cec
• fuzzy logic controllers   jb24 at chrysler.com
• Abrasive flow finishing   jb24 at chrysler.com
• Abrasive flow finishing   jb24 at chrysler.com
• turbo sizing   jb24 at chrysler.com
• GM ALDL interface   Kevin_Swanson at cpr.ca
• Ignition question   Kevin_Swanson at cpr.ca
• Low voltage guage   amcknig at creighteld.k12.az.us
• Fuel pump questions   amcknig at creighteld.k12.az.us
• Fuel pump questions   amcknig at creighteld.k12.az.us
• Fuel pump questions   amcknig at creighteld.k12.az.us
• Fuel pump questions   amcknig at creighteld.k12.az.us
• Injector resistance.   amcknig at creighteld.k12.az.us
• Advice and suggestions?   amcknig at creighteld.k12.az.us
• Abrasive flow finishing   amcknig at creighteld.k12.az.us
• alfa twin cam   dzorde
• Fuel pump questions   dzorde
• Abrasive flow finishing   dzorde
• test equipment   dzorde
• Motronic Tuning program, Audi, Porsche 944T   r_tech at earthlink.net
• air shrouded injectors   r_tech at earthlink.net
• Abrasive flow finishing   r_tech at earthlink.net
• V-8 to V-6 Tack conversion   peter paul fenske
• Eprom   peter paul fenske
• IAC   peter paul fenske
• IAC   peter paul fenske
• IAC   peter paul fenske
• tachometer question v8-v6   peter paul fenske
• 68764C   peter paul fenske
• Another New EFI Person   peter paul fenske
• AIC   peter paul fenske
• Needham's Phone Number   peter paul fenske
• Gas Analyzer   peter paul fenske
• Turbo Sunbird   peter paul fenske
• Turbo Sunbird   peter paul fenske
• No Subject   kerrie
• 1200 cc/m inj price ?   ptimmerm at mashtun.JPL.NASA.GOV
• Fuzzy Logic   ptimmerm at mashtun.JPL.NASA.GOV
• GM Tranny Bolt Patterns   matt
• oxygen sensor readings   martin at mgass.demon.co.uk
• Opel/Vauxhall's unconnected socket in the engine bay   martin at mgass.demon.co.uk
• GM/Delco chip numbers   martin at mgass.demon.co.uk
• Low voltage guage   neil.poersch at mts.mb.ca
• Low voltage guage   neil.poersch at mts.mb.ca
• Plenum Area   bruce plecan
• Plenum Area   bruce plecan
• IAC modifications   bruce plecan
• EGR   bruce plecan
• Wiring Pinout   bruce plecan
• Wiring Pinout   bruce plecan
• GM ECM TBI Questions   bruce plecan
• Wiring Pinout   bruce plecan
• "Tunable TBI Iinjectors"   bruce plecan
• "Tunable TBI Iinjectors"   bruce plecan
• Patent Numbers   bruce plecan
• LED O2 Display   bruce plecan
• Address   bruce plecan
• Injector Recommendations   bruce plecan
• Ignition question   bruce plecan
• Ignition question   bruce plecan
• alfa twin cam   bruce plecan
• Fuel pump questions   bruce plecan
• IAC   bruce plecan
• IAC   bruce plecan
• Fuel pump questions   bruce plecan
• Fuel pump questions   bruce plecan
• IAC   bruce plecan
• Fuel pump questions   bruce plecan
• Fuel pump questions   bruce plecan
• IAC   bruce plecan
• Fuel pump questions   bruce plecan
• Fuel Lines   bruce plecan
• Fuel Lines   bruce plecan
• Fuel pump questions   bruce plecan
• Non-programmer needs a hand   bruce plecan
• Fuel pump questions   bruce plecan
• Fuel pump questions   bruce plecan
• IAC   bruce plecan
• Fuel pressure regulators, was Re: Fuel pump questions   bruce plecan
• tachometer question v8-v6   bruce plecan
• Fuel pressure regulators, was Re: Fuel pump questions   bruce plecan
• Gas Tanks   bruce plecan
• Fuel pressure regulators, was Re: Fuel pump questions   bruce plecan
• Fuel pressure regulators, was Re: Fuel pump questions   bruce plecan
• Fuel pressure regulators, was Re: Fuel pump questions   bruce plecan
• Hexidecimal   bruce plecan
• Fuel resivoir/tank baffles   bruce plecan
• Fuel pump questions   bruce plecan
• crank fuse   bruce plecan
• 68764C   bruce plecan
• 2.8L/3.1L AND 3.8L FWD same bellhousing pattern?   bruce plecan
• A/F Ratios via O2 Sensor   bruce plecan
• 50th Birthday   bruce plecan
• Knock alarm   bruce plecan
• Broadcast codes...   bruce plecan
• Abrasive flow finishing   bruce plecan
• FWD vs. RWD patterns   bruce plecan
• Broadcast codes...   bruce plecan
• turbo sizing   bruce plecan
• safety...in - line fuel pump   bruce plecan
• ALDL Project   bruce plecan
• Abrasive flow finishing   bruce plecan
• Unzip   bruce plecan
• CALPAK (was: Broadcast codes...)   bruce plecan
• O-Scope   bruce plecan
• Injector Firing   bruce plecan
• turbo a 2 stroke 2 cylinder   bruce plecan
• Archive access   bruce plecan
• Needham's Phone Number   bruce plecan
• TEST   bruce plecan
• GM/Delco chip numbers   bruce plecan
• EPROM/CALPAK   bruce plecan
• Injector Firing   bruce plecan
• Wiring Pinout   steve ravet
• GM ECM TBI Questions   steve ravet
• GM ECM TBI Questions with more information   steve ravet
• Patent Numbers   steve ravet
• GM ALDL interface   steve ravet
• GM ALDL interface   steve ravet
• GM ALDL interface   steve ravet
• Another New EFI Person   steve ravet
• ALDL resistive control and PWM control classes   steve ravet
• Broadcast codes...   steve ravet
• FWD vs. RWD patterns   steve ravet
• safety...in - line fuel pump   eric schumacher
• Fuel pump questions   sfg
• Fuel pump questions   sfg
• Fuel pump questions   sfg
• Fuel pump questions   sfg
• Stumped by TPI   sfg
• Broadcast codes...   sfg
• New member   sfg
• Stumped by TPI   sfg
• ALDL monitoring   sfg
• tuning EFIs   sfg
• Edelbrock retrofit PFI system   sfg
• safety...in - line fuel pump   sfg
• GM Saginaw Fuel Line Fittings   sfg
• GM/Delco chip numbers   sfg
• Need conversion equation for PS, HP, and kW   sdelanty at sonic.net
• DIY injector cleaning   swagaero
• DIY injector cleaning   swagaero
• address   swagaero
• IAC   swagaero
• EFI kits?   xanadu at tiac.net
• New to the Group   bmccord at whittman-hart.com
• crank fuse   bmccord at whittman-hart.com
• Hexadecimal   bmccord at whittman-hart.com
• Glossary   bmccord at whittman-hart.com
• Fuel pump questions   bmccord at whittman-hart.com
• Abrasive flow finishing   bmccord at whittman-hart.com
• Abrasive flow finishing   bmccord at whittman-hart.com
• Abrasive flow finishing   bmccord at whittman-hart.com
• Abrasive flow finishing   bmccord at whittman-hart.com
• EFI kits?   xanadu
• EFI kits?   john ziino

Last message date: Wed Dec 31 22:26:19 GMT 1997
Archived on: Thu May 30 05:51:28 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...