AIC

[Paul]

Tony,
I would be interested in seeing your diagram and trying something 'simple'
out.  Was there a limit to the number of injectors that could be driven?
Paul

> A while back, we built a little circuit that worked similar to this, but
> worked slightly different as follows.
>
> A signal from an injector (Banked mode) started a timer, which had its
> time base adjusted by the amount of boost.
> Below a certain amount of boost (<.5psi) nothing happened. Above .5psi
> the extra injectors were actuated.
>
> As more boost was added, the extra injectors came on longer. The extra
> fuel curve followed a linear 'curve'
> which was set by a pot. Not very hi-tech, but it worked VERY well. If
> any body is interested, I will release the circuit diagram.