Injector resistance.

[Joe Chiasson]

Its a peak and hold injector,  applying 12 V will only work with a
saturation,  hopefully you didn't see any smoke while applying the 12 V,
that would be bad!

----------
> From: Michael Farrugia <mikefarr at hotmail.com>
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Injector resistance.
> Date: Sunday, December 14, 1997 10:10 AM
> 
> Hello all,
> I have been given a Bosch turret which belonged to a Fiat Punto.  My 
> friend who gave it to me is certain that the Injector should work.  
> However when I apply 12V to it, it does not move or make any sound at 
> all.  I'm sure I am applying the right polarity because there are '+' 
> and '-' signes to mark the connectors.  I have measured the resistance 
> and it reads 1.9 ohms!  Is this low for an injector?  Should I apply 12V 
> DC or something differnt?
> Thanks in advance.
> Michael
> 
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com