Broadcast codes...

[bruce plecan]

If the 1227747 is used in 4.3s, 5.0s, 5.7s, and 7.4s with the same prom but
different
injectors, and use the same calpaks for all but the v-6, and if the calpak
is for
limp home, and other misc itmes, how does the ECM figure the timing.  I
would 
think that the calpak does have the info that tells the ECM the number of
cylinders.
   Maybe it was just the combination that I was running, but in the quest
for HP
I tried a v-6 calpak, and it sure seemed down on power.

On another note, does any know for sure if injectors are rated at 100% duty
cycle,
I'd read in the archives, that they are rated at 80%
  TIA     Bruce      nacelp at bright.net