Radiator hose intake manifold

[Daniel Burk]

Well,  what we did was buy some aluminum tubing from "Aircraft Spruce",
a mail order experimental aircraft hobby shop.  We determined our length
and had a fabrication shop mandrel bend some pre-determined angle into
four sections.  We then machined up some bosses, and welded up a "log"
plenum.  We then welded the whole darned thing together.  It almost
worked.  It turns out that our plenum held about as much air as your
college-sized trash can, and the resultant throttle response was poor,
to say the least.  This year's system should be much better!

	-- Or were you referring to the drinking straw solution?
		-- I just quit drinking my beer that way, and
		used a mug instead of directly from the pitcher. =:0
								    \
								     U

		Cheers mate,

				-- Dan.