Torque BS Filter ``

[jshapiro at bit-net.com]

On Fri, 21 Feb 1997, DICK BREWSTER wrote:

> Stuart, a very good smell test to use on torque claims for 
> naturally aspirated four stroke gas engines the 1 to 1.1 ft-lb 
> per cubic inch test.

Another good measure to check when looking at dyno graphs is that
the HP and Torque curves will cross at 5250 RPM.  If they don't,
you're looking at a bogus or fudged graph.  HP and Torque will be
the same at 5250 RPM because of the mathematical relationship
between the two.

-Jody
--
http://www.bit-net.com/~jshapiro/z28/