Calpak and Boost

[Todd Knighton]

peter paul fenske wrote:
> 
> Hi All
> 
> Just was interested if anyone had the eprom contents of the syclone
> calpak. If not ok just have to spend some money.
> 
> Also if someone can send me the 89 tpi prom I could have a look
> and see what it would take to disable the egr and vats for you
> guys.
> 
> With the syclone stuff I am getting serious about writing some
> code and adding it to the 730 tpi stuff. What I want to do
> is interecept the map a/d reads using a 2 bar map instead of
> a 1 bar. When pressure exceed baro or a calibrated value I intend
> to switch the open loop calibration to my own table. Also switch
> in an external driver for additional injectors when the boost
> from the vortech cuts in. This is similiar to what is done in
> the LT5 to switch in the extra injectors.
> 
> I would like to see how the Map reads are done in the syclone.
> 
> Tnx everybody: peter

	Got some Grand National stuff, stock and modified, no syclone stuff
though.

Todd Knighton
Protomotive Engineering