Coolant temp sensor circuitry, injector lugs

[Brad Sheridan]

>Also, the injector connectors used on late model Mazda engines, some
>Mitsubishi's etc - what are they, where can the lugs that fit in them be
>found?

  Do they use Nippon Denso injectors? I've been told that 87-89 Maximas,
which use Nippon Denso injectors, had wiring harness problems, so as a
result, Nissan dealers should have these connectors in stock, but the one
dealer I've checked with so far was out. If they use Bosch, the Nissan
dealer has those too, and they're also used in most European cars, so
getting them from a VW dealer or the like should be easy.
If you're not sure of the diff. between Bosch and Denso, the Bosch
connectors are rectangular, and have a metal clip to secure the connector,
the Denso are rectangular also, but have rounded off corners, and AFAIK
don't use a metal clip to secure the connector. Instead they have a plastic
push tab on the connector that secures it. The injectors should also have
Denso or Bosch written on them somewhere.

Hope this helps,
Brad