O2 sensor mounting

[FreshMar at aol.com]

I used a Bosch replacement O2 sensor, about $50 (a lot for me) new, that 
came with a flange to attach to the exhaust pipe. I just drilled the 
holes for the two mounting bolts and the sensor, cut out a suitable hi- 
temp gasket, and mounted the flange. The O2 sensor then screws in like it 
should. The flange I believe is st.steel, and is about 2-3 mm thick. It 
sould be no problem for someone compitent in welding to put one of these 
things on...

Mario T.
mailto:Freshmar at aol.com-----'76 VW Camper FI A/T,,'79 Fiat X1/9