Lean mixture on 1-2 shift
Mark Eidson
mark.eidson at tempe.vlsi.com
Wed Mar 5 20:23:56 GMT 1997
At 11:37 AM 3/5/97 -0700, you wrote:
The temperature in my previeus post were F not C. me
>The fuel pressure is normal, 15 psi, for this system. This seems to only
>occur as the engine is warming up after going closed loop at 70F. My theory
>is the closed loop operation takes out the warm up enrichment. There is no
>way that I can find to delay the on set of closed loop operation until the
>engine reaches operating temperature. It must be hard coded. I have just
>tried stopping warmup enrichment, a table driven operation, at 70F and hope
>that the closed loop operation will add in the required fuel. The closed
>loop is to slow to compensate the other way around. me
>
>At 08:53 PM 3/4/97 -0500, you wrote:
>>What is the fuel pressure?
>>
>>
>>
>>
>***************************************************************************
>* Mark Eidson Voice: (602)752-6513 *
>* Fax: (602)752-6000 *
>* Manager System Integration and Home: (602)831-6079 *
>* Verification E-Mail: mark.eidson at tempe.vlsi.com *
>* VLSI Technology, Inc. *
>* 8375 South River Parkway *
>* M/S 265 *
>* Tempe, Arizona 85284 *
>***************************************************************************
>
>
>
***************************************************************************
* Mark Eidson Voice: (602)752-6513 *
* Fax: (602)752-6000 *
* Manager System Integration and Home: (602)831-6079 *
* Verification E-Mail: mark.eidson at tempe.vlsi.com *
* VLSI Technology, Inc. *
* 8375 South River Parkway *
* M/S 265 *
* Tempe, Arizona 85284 *
***************************************************************************
More information about the Diy_efi
mailing list