FW: Knock Sensor Output
john_carroll
jac at wavecom.net
Thu Mar 27 01:13:49 GMT 1997
I see several volts into scope.
Excite the sensor with a signal generator and you can get a pretty good idea of the dynamic range. Gate a high audio signal with a 100 hz square wave and you can hear engine knocks from the transducer.
John Carroll
-------------------------------------
jac at wavecom.net
03/26/97 18:07:55
>Does anybody know the output signal amplitude and
>dynamic range of a GM knock sensor?
>
>- Bruce
>
>--
>-----------------------------------------------------
><<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>-----------------------------------------------------
> Bruce A. Bowling
> Staff Scientist
> Thomas Jefferson National Accelerator Facility
> 12000 Jefferson Ave - Newport News, VA 23602
> (804) 249-7240
>bowling at cebaf.gov http://devserve.cebaf.gov/~bowling
>-----------------------------------------------------
><<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>-----------------------------------------------------
>
-------------------------------------
jac at wavecom.net
03/26/97 17:57:11
More information about the Diy_efi
mailing list