2 stroke Water injection

[Frederic Breitwieser]

JE,

If its a refillable tank, such as the 5oz, 7oz, 11oz or 20oz. I have loads 
of these tanks in both steel and aluminum for my paintball equipment, but 
I'm sure with a little retrofitting, they could provide high pressure water 
storage.  I'm thinking that 20oz is probably not enough water for a good 
400 mile ride, and of course, 1000psi capability is unnecessary.  I still 
think a medium water-based fire extinguisher with an electric valve would 
be the idea way to go.  Use a small nitrous injecter (I know we are still 
discussing corrosion issues) and time it to pulse into the air stream after 
the turbo/supercharger ever time a Fuel injector fires, at a much shorter 
duration.

This is gonna be a good project :)

Fred

On Thursday, May 01, 1997 11:19 AM, Jeffrey Engel 
[SMTP:jengel at fastlane.net] wrote:
> > > I believe you could more accurately meter the water spray by using a
> > > solenoid rather than a washer pump.

> What about using a BB gun CO2 canister for pressure?