toyota 22R injection

[Michael F. Sargent]

Easy one! Toyota made an injected version of the 22R, called the 22RE. They 
used it in 4x4's and 4Runners for about 8 years. They also used it in Celica 
GTS's. You should be able to find everything you need in the bone yards. Find 
one where the body is clearly the problem, and all of the FI parts should be 
fine. (My 22RE 4x4 is almost 11 years old, has 269,000 km on it, starts like a 
charm even in Ottawa winters, still runs like it was new, and none of the FI 
or ignition components have ever been touched [other than routine 
maintenance].)

	Mike

----------
From: 	owner-diy_efi at coulomb.eng.ohio-state.edu on behalf of Brian Monger 
(Duty Programmer)
Sent: 	Tuesday, May 6, 1997 7:46 AM
To: 	DIY_EFI at coulomb.eng.ohio-state.edu
Subject: 	toyota 22R injection


hey all,

interested in fitting efi to my toyota land cruiser 22R engine - anyone
done this project (in australia??), and can let me know where to get the 
bits?  computer?  manifolds? anything else?

Brian

Brian  Monger                   |email:        brian at acs.itd.uts.edu.au
(aka Bru)                       |phone:           (w)  +61 (2) 95142118
Duty Programmer	                |                 (h)          96247508
Academic Computing Services     |fax:                          95141994
Information Technology Division |room:                            1/916
University Of Technology Sydney |http://milliways.itd.uts.edu.au/~brian


		Quidquid latine dictum sit, altum viditur.